2022-02-22DESIGN OF GALLEY-LAYOUT/FITOUT AND SUPPLY AND INSTALLATION FOR LÉ NIAMH (Department of Defence)
Galley design to include most economical and user friendly and maintenance accessible layout in existing space, utilizing and installing all equipment listed below, including supply of said equipment, but maintaining best value for money, cost effectiveness (in terms of the requirement of additional cabling, air supply, extraction ducting etc), and adhering to best practices in terms of fire safety (marine FSS Code) and HACCP regulations. Flooring is not included in this contract. However, work on the …
View the procurement » Mentioned suppliers:Broderick Bros Ltd.
2022-02-10Supply and Delivery of Small Plant and Hand Held Power Tools (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) invites Applications from suitably qualified companies to participate in the Pre-Qualification process for the proposed tender for the supply and delivery of Small Plant Hand Held Power Tools and Equipment.
Small plant comprises of specific, portable hand held equipment used by Permanent Way Infrastructure staff on Iarnród Éireann’s Rail Network.
View the procurement »
2021-11-2620/132 - Framework for the Design, Supply & Install of SR3 Rated Doors (Ervia)
New doors are required for approximately 56 sites, all in the ROI. Approximately 200 doors are need in total across these sites (approximately 100 single doors and 100 double doors). New doors are to be steel and rated to Loss Prevention Standard (LPS) 1175 SR3. Where doors are being replaced, the ventilation in the new doors shall, as a minimum, match the existing doors. A PSCS will also be required to be appointed for the entirety of the works
View the procurement »
2021-08-31Supply of Custodial locks, high-security locks keys, and associated parts for all prison sites throughout Ireland (Irish Prison Service)
The Contracting Authority proposes to engage in a competitive process for the establishment of a framework agreement for the supply of Custodial locks, high security locks, keys, and associated parts. The locks must be compatible with existing doors without modification to the doors.
Custodial Locks and high security locks are defined as high security mechanical, electrical and electronic locks used in a custodial setting such as a prison for purposes of restricting movement of incarcerated persons …
View the procurement » Mentioned suppliers:Assa Abloy Limited
2021-05-28Supply of Standard, Bespoke and Safety Critical Engineering Fasteners (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) operate a number of rolling stock fleets, for which standard and bespoke engineering fasteners are used to cover all running maintenance and heavy maintenance activities at all of its rolling stock maintenance facilities nationwide. The rolling stock maintenance facilities are located in Inchicore and Fairview (Dublin), Limerick, Cork, Drogheda and Portlaoise. IÉ now invites suitably qualified companies to participate in a tender process for the Supply of Standard, Bespoke and Safety …
View the procurement »
2021-04-23Supply of Engineering Consumables (Dublin Bus/Bus Atha Cliath)
Dublin Bus require supplier(s) of engineering consumables for their eight maintenance depots located in Dublin. The contract will operate as a multi party framework agreement period of 3 years with an option to extend for a further 2 periods of 12 months.
View the procurement » Mentioned suppliers:AEF
2021-04-06Supply of Misc. Chassis and Suspension Components (Dublin Bus/Bus Atha Cliath)
The purpose of this pre-qualifying questionnaire (PQQ) is to enable the contracting entity to evaluate the suitability of applicants and to arrive at a shortlist of potential suppliers for a framework. It is intended that following the PQQ evaluation a number of applicants will be invited to tender for the specific requirements of the framework. The framework will be for a period of 3 years with a provision for two one year extensions. The value over the 5-year period is estimated at EUR 1.5 million.
View the procurement »
2020-11-04Request for Tenders for the Supply, Delivery, Installation, Removal and Maintenance of Equipment for Construction... (St Mary's C.B.S (Enniscorthy))
Proposals from tenderers are being sought to supply and deliver sustainable (where possible) products, install and remove/re-use and maintain construction studies, wood machining and preparation room and/or engineering and/or technology and drawing equipment and machinery in St Marys CBS, Enniscorthy. It is intended to award a contract to a single service provider for each of the lots, (Lot 1 to Lot 3). Tenderers must be able to supply each item on the specification list as per the lot tendered for as …
View the procurement »
2020-07-20Tools and Hardware for the Irish Public Sector (The Office of Government Procurement)
The Minister for Public Expenditure and Reform (the ‘Contracting Authority’) is issuing this request for tenders (‘RFT’) as a central purchasing body for use by the framework clients (defined below). The Office of Government Procurement (the ‘OGP’) is an office within the Department of Public Expenditure and Reform tasked with sourcing goods and services on behalf of the public service. References to the Contracting Authority will be deemed to include the OGP. The Contracting Authority invites tenders …
View the procurement » Mentioned suppliers:A.R Brownlow LtdIndustrial and Farm Machinery LtdPerenco Ltd
2020-05-28PSQ for the Supply of Misc. Body Equipment (Dublin Bus/Bus Atha Cliath)
The purpose of this pre-selection questionnaire (PSQ) is to enable the contracting entity to evaluate the suitability of applicants and to arrive at a shortlist of potential suppliers for a framework. It is intended that following PSQ evaluation, a number of applicants will be invited to tender for the specific requirements of the framework. The framework will be for a period of 3 years with a provision for two one year extensions. The value over the 5 years is estimated at EUR 2 000.
View the procurement » Mentioned suppliers:Alexander Dennis LtdArdee Coach Trim Ltd
2020-05-117486 — Supply of Workshop Consumables (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) has a requirement for a specialist company to provide engineering workshop consumables to all workshop stores, engineering facilities and depots nationwide.
The proposed duration will be for an initial period of 3 years with an option to extend the term by a further 1 year, giving a maximum contract duration of 4 years.
Workshop consumables will contain the following product types (but not limited to): abrasives, adhesives, sealants, chemicals, lubricants, tapes, torches, batteries, …
View the procurement »
2020-04-17Integrated Physical Security Projects Framework (EirGrid plc)
EirGrid require the services of a private security authority (PSA) licensed specialist Physical Security Integration Company. They will need to operate within the Republic of Ireland and Northern Ireland and possess previous experience of installations at National Critical Infrastructure sites, with the technical competence and the appropriate resources to deliver highly complex physical security projects as turnkey solutions on behalf of the EirGrid Group. EirGrid envisages qualifying up to six …
View the procurement »
2020-01-14L.É. RÓISÍN Design of Galley Layout, Fit-out and Supply and Installation of Galley Equipment (Department of Defence)
Galley design to include most economical and user friendly layout in existing space, utilizing and installing all equipment, including supply of said equipment, but maintaining best value for money, cost effectiveness (in terms of the requirement of additional cabling, air supply, extraction ducting, etc.) and adhering to best practices in terms of fire safety (marine FSS Code) and HACCP regulations.
View the procurement »
2019-11-28Rolled Steel Cup Type Washers for Railway Sleepers Post Tensioning (Irish Rail)
This is a call to competition by IE for the supply and delivery of rolled steel cup type washers to its sleeper factory in Portlaoise
Iarnród Éireann proposes to pre-qualify a number of suitably qualified candidates to participate in the tender process for the supply of rolled steel cup type washers (DD13 or DC04 material to EN10111 or EN10130) for use in post tensioned railway sleepers,
It is proposed to award a 1-year fixed price contract with the option to extend annually up to a maximum of 3 years. …
View the procurement » Mentioned suppliers:P-TEC International GmbH
2019-11-28Supply and Delivery of Hexagonal Slit Nuts (Irish Rail)
This is a call to competition by IE for the supply and delivery of Hexagonal Slit Nuts to its sleeper factory in Portlaoise
Iarnród Éireann proposes to pre-qualify a number of suitably qualified candidates to participate in the tender process for the supply of Hexagonal Slit Nuts — manufactured from cold drawn steel ((Material DIN 1651-1970, 9S Mn28k) — for use in post tensioned railway sleepers
It is proposed to award a 1 year fixed price contract with the option to extend annually up to a maximum of 3 …
View the procurement » Mentioned suppliers:P-TEC International GmbH
2019-11-27Supply and Delivery of end Threaded Cold Drawn High Tensile Steel Wire (Irish Rail)
This is a call to competition by Iarnród Éireann (IE) for the supply and delivery of of high tensile steel wire, to be used in the manufacture of sleepers, to its sleeper factory in Portlaoise, Co. Laois.
IE proposes to pre-qualify a number of suitably qualified candidates to participate in the tender process for the supply of supply and delivery of of high tensile steel wire.
It is proposed to award a 1 year fixed price contract with the option to extend annually up to a maximum of 3 years.
Prices in …
View the procurement » Mentioned suppliers:Pretensados Del Norte
2019-08-0918/236 — High Pressure Fittings Multi Party Framework (Ervia)
The scope of this framework agreement is for the manufacturing and/or supply and delivery of high pressure fittings as outlined in the lots below, for use on the transmission and distribution natural gas networks and pressure reduction and metering installations, up to a maximum operating pressure equal to 150 bar barg. This will be a multi-party framework for an initial 5 years, with the option of a further 3 single year extensions.
The framework may include arrangements for delivery to GNI and GNI (UK) …
View the procurement »