2026-04-29Deadline 2026-05-27St. Oliver Plunkett National School, Newcastle, Athenry, Co. Galway - Mechanical and Electrical Upgrade Works (St Oliver Plunkett NS Newcastle)
The existing original school building was constructed in 1977, with a classroom extension added between 2010 and 2013, including an additional classroom extension in 2025, with a total floor area of approx. 732 sq. metres and comprises of 7 number mainstream classrooms, General Purpose room, staff room, kitchen, toilets, office, store, boiler house and circulation areas. The remedial works that require to be carried out consist of the stripping out, removal and proper disposal of the redundant LPHW Space …
View the procurement »
2026-04-28Deadline 2026-05-19Call for Tender for the supply and installation of T4 subjects to St. Colman's College Claremorris, 64610N (St. Colman's College (Claremorris))
The Board of Management of St Colman’s College (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). Lot 1 - Construction Studies/Wood Technology Lot 2 - Wood Machining and Preparation Lot 3 - Engineering Lot 4 - Design and Communication Graphics (DCG) Lot 5 - Graphics Design Lab Lot 6 - Electronics (Not mandatory!)
View the procurement »
2026-04-27Deadline 2026-06-04Supply of an Integrated Dosing, Mixing and Packaging System for Growing Media Production including design,... (Enviro Grind Ltd)
Enviro Grind (the Contracting Authority) is a family run recycling company and pioneer in the Island of Ireland Bioeconomy. Enviro Grind specialises in the reprocessing of waste residues that would otherwise be sent to landfill. The company has extensive experience in processing organic residues, including wood waste, gypsum waste, and organic bio-wastes such as food waste, garden and park waste, and fish waste. Enviro Grind also has significant expertise in the development of high-value, peat-free …
View the procurement »
2026-04-24Deadline 2026-05-16Supply, Delivery, Installation and Commissioning of Offset Printing Press (Browne Printers Ltd (CA))
Browne Printers Ltd invites tenders for the supply, delivery, installation and commissioning of a sheetfed offset printing press The equipment must be suitable for high-volume commercial printing and include all necessary installation, commissioning, operator training, and warranty/support services. Full specifications and requirements are detailed in the tender documentation.
View the procurement »
2026-04-16Deadline 2026-05-19CL3642F - RFT to Establish a Multi-Supplier Framework Agreement for the Supply, Delivery, Installation and... (Education Procurement Service (EPS))
The Supply, Delivery, Installation and Commissioning of Pipefitting Apprenticeship Equipment for Cork Education and Training Board (CETB), Waterford and Wexford Education and Training Board (WWETB) and Louth and Meath Education and Training Board (LMETB). Equipment includes pipework and mechanical equipment, Orbitalum equipment and cutting and bending equipment. This is to service the requirements of the curriculum for the pipefitting apprenticeship course. Over 90 percent of pipefitting apprentices work …
View the procurement »
2026-04-15Deadline 2026-05-14Provision of Engineering Supplies/Equipment and Related Items to City of Dublin ETB Schools and Centres (City of Dublin Education and Training Board)
Provision of Engineering Supplies/Equipment and Related Items to City of Dublin ETB Schools and Centres. The Contracting Authority wishes to establish a single-party framework agreement to meet its requirements for the supply, delivery and installation of equipment for the Engineering Classes in City of Dublin ETB Schools and Centres. The equipment for the training services courses must be durable, robust, high quality and suited to a training environment for students learning practical skills given the …
View the procurement »
2026-04-12Deadline 2026-05-12Single Party Framework for Mechatronic and Robotic Equipment and Software (Mayo Sligo and Leitrim ETB)
The establishment of a Single Party Framework Agreement for the provision of Robotic Manufacturing Systems, Equipment and Software for use in a manufacturing training environment and including an immediate requirement for the following; 1 x Industry 4.0 Mechatronics Manufacturing Cell (completed system) and 2 x Robot Training and Interchangeable Product Simulation Application System
View the procurement »
2026-04-08LOT-3: Provision of a100kw Diesel Generator Set. (N. Barrett Engineering Ltd.)
LOT-3: Provision of a100kw Diesel Generator Set. The Contract Will be Awarded subject to the MEAT(Most Economically Advantageous Tender) criteria as follows: (a) Price - 40 marks. (b) Warranty - 30 marks. (c) Specifications( to include Delivery, Assembly, Training and Back-Up ) - 30 marks. Total = 100 Marks. Please include both Vat exclusive and Vat inclusive figures in your Tender.
View the procurement »
2026-04-08LOT 2: Provision of a Bodor T Series 6kw Tube Laser. (N. Barrett Engineering Ltd.)
LOT 2: Bodor T Series 6kw Tube Laser. The Contract Will be Awarded subject to the MEAT(Most Economically Advantageous Tender) criteria as follows: (a) Price - 40 marks. (b) Warranty - 30 marks. (c) Specifications( to include Delivery, Assembly, Training and Back-Up ) - 30 marks. Total = 100 Marks. Please include both Vat exclusive and Vat inclusive figures in your Tender.
View the procurement »
2026-04-08cFT Call for Tenders for the Supply,Delivery and Installation of Engineering Tools,Machines and Equipment to... (Coláiste Cholmcille)
The Board of Management of Colaiste Cholmcille Community School (the contracting Authority)invites tenders("Tenders") to this call for tenders(CFT) from economic operators ("Tenderers") for the supply of goods as described in this CFT.The goods are to required to be delivered and installed to Colaiste Cholmcille Community School,Ballyshannon co Donegal before end of July 2026.All goods must meet the specifications as outlined by the Department of Education
View the procurement »
2026-03-31Design, supply, installation, commissioning and maintenance of a process air supply and distribution system for a... (Enviro Grind Ltd)
Enviro Grind specialises in the reprocessing of waste residues that would otherwise be sent to landfill. The company has extensive experience in processing organic residues, including wood waste, gypsum waste, and organic bio-wastes such as food waste, garden and park waste, and fish waste. Enviro Grind also has significant expertise in the development of high-value, peat-free products. Enviro Grind is a member of the consortium delivering The REGENERATE Project (REcyclinG phosphatEs and NitrogEn fRom …
View the procurement »
2026-03-26Swimming Pool and Plant Maintenance Services for Trinity College Dublin, the University of Dublin (Trinity College Dublin the University of Dublin_336)
The University seeks to appoint a competent contractor for the provision of Swimming Pool and Plant Maintenance Services to the TCD Sports Team. The specification and services requirements are wholly described within the tender document set. Tenders must be submitted via the electronic postbox available on www.etenders.gov.ie by the response deadline. Only Tenders submitted to the electronic postbox will be accepted. Tenders submitted by any other means (including but not limited to by email, fax, post …
View the procurement »
2026-03-20Eliteform-Project 2026- Power Folding Machine (Eliteform Manufacturing Ltd)
Eliteform Manufacturing Ltd invites tenders for the supply, delivery, installation, commissioning, and training of a semi-automatic long-length sheet metal folding/bending machine or equivalent for use in cladding, roofing, and architectural fabrication. The equipment must be suitable for continuous industrial use and capable of producing accurate, repeatable bends and hems on long sheet metal components. It shall process materials such as mild steel, aluminium, and stainless steel within typical …
View the procurement »
2026-03-18Eliteform-Project-2026-4 Roll plate Bending Machine (Eliteform Manufacturing Ltd)
Eliteform Manufacturing Ltd invite tenders for the supply of a heavy-duty 4-roll hydraulic plate rolling machine for industrial forming of mild steel, aluminium and stainless steel plates. The machine shall be capable of precision rolling of plates up to: • 4.0 mm mild steel • 3.0 mm stainless steel • Maximum working length: 4000 mm The machine shall be designed for continuous industrial production with high precision, repeatability, and long service life. Requirments; • The top and bottom rolls shall …
View the procurement »
2026-03-18Supply and Installation of Worsted/Semi-Worsted Mini Mill Wool Processing Equipment (KATARINA HRUSKOVA T/A WOOLSTORE LEADER GRANT BENEFICIARY)
This tender relates to the supply, delivery, and commissioning of a comprehensive suite of worsted/semi-worsted wool processing equipment for a new woollen mini-mill. The required equipment includes: Fiber Picker/Opener Carding Machine (1,000mm working width) Pindrafter with Autoleveller Integrated Can Coiler and Sliver Cans 24-Spindle Spinner-Plyer Precision Cone Winder The contract includes delivery to site, installation, and basic operator training. This procurement is being undertaken by a …
View the procurement »
2026-03-12Tender for the Supply, Delivery, Installation and Commissioning of Industrial 5-Axis Vertical CNC Machining Centre... (Munster Technological University.)
Munster Technological University is seeking tenders from competent service providers for the supply, delivery, installation and commissioning of an industrial 5-Axis vertical CNC machining centre to MTU Kerry. The deadline for the Supply, Delivery, Installation and Commissioning of the Industrial 5 Axis Vertical CNC Machining Centre is the 31st August 2026. Tenderers are asked to be aware of this delivery date when applying for this CFT. Full details are contained in the tender documentation attached to …
View the procurement »
2026-03-10UCDOPP5569 Multifunction Devices and Printers, and Associated Services (University College Dublin ( UCD ))
UCD is seeking to appoint a suitable experienced Contractor to provide Multifunction Devices and Printers, and Associated Services to University College Dublin as follows: (i) Supply of equipment for the Student and Staff print/copy/scan (Copi-Print UCD). (ii) Supply of equipment for purchase by UCD staff (iii) Maintain the existing portfolio of equipment – see UCDOPP5569 Existing Equipment Asset Register (iv) Provide full time Service Manager and part time Staff Member
View the procurement »
2026-02-27LA3655C - TUS - CFT for the Supply Four (4) Manual Lathes and Four (4) Manual Milling Machines (2 Lots) for... (Education Procurement Service (EPS))
The Technological University of the Shannon: Midlands Midwest request the supply of Manual Lathes, Four (4). Manual Milling Machines, Four (4), for teaching purposes. Lot 1: Tenders are sought for the supply, delivery and installation of four (4) manually operated centre lathe machine tools. The lathes will be used in the workshop for turning, facing, drilling, and threading operations on metallic materials. The lathe's must be of solid construction to ensure stability and provide a vibration-free and …
View the procurement »
2026-02-23Forklift Services (Irish Defence Forces_1144)
This public procurement competition will be divided into two lots. Each Lot will result in a separate contract. Lot 1 Maintenance Repair and Certification of Lift Truck Machinery and Parts Pickers. Lot Training and Recertification of Defence Forces personnel on Lift Truck Parts Pickers Pallet Truck machinery.
View the procurement »
2026-02-13New Lift and Associated Works at Gaelscoil Chorain (Gaelscoil Chorain)
Construction of new lift shaft at Gaelscoil Chorain, Youghal, Co. Cork. Including internal modifications, roof works and construction of ramps, steps and landings at entrances to school Tenders to be submitted by email to frank@fomce.ie by 15:00 on Friday the 6th of March 2026
View the procurement »
2026-02-04CNC Fiber Laser Cutting Machine (CMAR Eng.)
C-MAR Engineering invites quotations from suitably qualified suppliers for the supply, delivery, installation, commissioning, and training of a CNC Fiber Laser Cutting Machine. The machine must be suitable for precision cutting of metal materials, providing high accuracy, repeatability, and reliability in an industrial environment.
View the procurement »