Recent procurements of miscellaneous general and special-purpose machinery in Ireland
2023-10-242023/48 CF for the provision of Robotics Equipment, Training and Demonstration in 2 Lots (Louth and Meath Education and Training Board 1384)
The Contracting Authority invites responses to this CFT for the establishment of a single party framework agreement for the provision of Robotics Equipment, Training and Demonstration in 2 Lots. Lot 1 Provision of Kuka or equivalent Robotic Equipment, Training Courses and Demonstration of equipment. Lot 2 Provision of Fanuc or equivalent Robotic Equipment, Training Courses and Demonstration of equipment. Tenderers responding to the CFT may respond for one or both Lots. Each Lot will result in a separate …
View the procurement »
2023-10-09Supply, Delivery and Commissioning of a Photonic 3D Microfabrication Printing System for Tyndall National Institute,... (University College Cork)
The photonic Packaging Group at the Tyndall National Institute is seeking to purchase equipment that will enable the 3D printing of spherical, aspherical, freeform and compound micro-optical elements on both optical fibers and photonic integrated circuits (PICs). The Photonic 3D printing system will be a key enabler for advanced photonics packaging research and will have applications in communications, life-science and critically, quantum computing, where such micro-optics can solve critical …
View the procurement »
2023-09-27LA2648C UCC - RFT for the Supply of a Printed Electronics Manufacturing System (PEMS) (Education Procurement Service EPS)
Tenders are sought for the supply, delivery, and installation of a standalone Printed Electronics Manufacturing System (PEMS) for rapid prototyping of 3D electronics, RF components, packages, and antennas. To assist the Tenderer, Tyndall has drawn up performance manufacturing specifications for the required PEMS that are detailed in the subsequent sections, which are considered as targets to be achieved by the Tenderer. The specifications detailed in this document are for a PEMS which will be used to …
View the procurement »
2023-09-04RFT for the Provision of Publications Dispatch Service (Department of Social Protection_349)
The provision of a publications dispatch service, primarily related to, but not limited to customer application forms and information leaflets, of the Contracting Authority. This requires the acceptance and fulfilment of email requests for department forms, leaflets and other publications, through the Contracting Authority's existing customer contact channels (which will be made available to the winning tenderer for their use for the duration of the contract) and/or by direct email from the Contracting …
View the procurement »
2023-08-31BLOOD DONOR SAMPLE TUBE CENTRIFUGES (Irish Blood Transfusion Service)
This User Requirement Specification (URS) details the requirements, purchase, installation, commissioning and validation of blood donor sample tube centrifuges for the National Donor Screening Laboratory (NDSL) at the Irish Blood Transfusion Service (IBTS). The NDSL is responsible for the testing of approx. 140,000 donations per year. Each donation has 4 samples taken for testing, 1 Virology Serum red top sample tube (6 ml serum clot activator), 1 ADG Plasma purple top sample tube (6 ml K3 EDTA K3) and 2 …
View the procurement »
2023-08-07Pre-qualification of Contracting Team for Construction of Leachate Treatment Plant at Ballynacarrick Landfill Site (Donegal County Council_1193)
The Contract will involve the design and installation of a replacement Leachate Treatment Plant on the restored Ballynacarrick Landfill Site in accordance with Waste Licence (W0024-04). The scope of the works include: - Construction Works on a Landfill - Design and construction of replacement Leachate Treatment Compound (consisting of a concrete bunded compound for storage/retention of potentially polluting substances for a High Hazard Facility (as defined by IPC Guidance Note on Storage and Transfer of …
View the procurement »
2023-07-20UCDOPP5334 Security Management Systems (University College Dublin UCD)
University College Dublin is seeking to establish a sustainable Multi-Supplier Framework Agreement for the provision of Security Management Systems as follows: ● Supply and installation of new equipment (CCTV VMS System Upgrade) ● Maintenance of new and existing equipment
View the procurement »
2023-07-14Call for Tenders for the supply, delivery, installation and maintenance of Construction, Wood Technology and... (Patrician Academy)
The Board of Management of Patrician Academy "the Contracting Authority" invites tenders "Tenders" to this call for tenders "CFT" from economic operators "Tenderers" for the supply of the goods as described in Appendix 1 to this CFT "the Goods". The Goods are required to be supplied and installed in Patrician Academy on or before the end of October 2023. In summary, the Goods comprise: Construction Studies, Wood Technology and Preparation, Graphics Design Lab, DCG tools and equipment Machinery and …
View the procurement »
2023-06-26LA2411C – University of Galway - RFT for the Supply, Delivery, Installation, and Commissioning of a Multimaterial... (Education Procurement Service EPS)
Tenders are sought by the library-based makerspace, University of Galway, for the Supply, Delivery, Installation, and Commissioning Bench top droplet-based printing system capable of printing in XY plane. Multimaterial functionality. Integrated drop watching capability. Mechanical drop formation and dispensing. Enclosed system. The system must be capable of taking a design from a computer (CAD) and to translate this into a computer aided manufacturing (CAM) functionality to produce print patterns. The …
View the procurement »
2023-06-22LA2589C – ATU Sligo - RFT for the Supply, Delivery, Installation and Calibration of Metal 3D Printing Equipment (Education Procurement Service EPS)
Tenders are sought for the supply, delivery, installation, and calibration of Metal 3D printing Equipment and required ancillaries, including the procurement of a metal 3D printer with a wet/dry vacuum cleaner, wet separator, PPE, and materials starter kit. This cell must comply with all relevant safety standards and be able to 3D print using a range of engineering metallic materials. Details of the desired equipment for the Metal 3D printing cell are laid out below. Suppliers MUST provide all …
View the procurement »
2023-06-09Access Control Works and Upgrades for Trinity College Dublin, the University of Dublin (Trinity College Dublin the University of Dublin_336)
Trinity College Dublin seeks to appoint competent and suitably qualified contractors for the provision Access control Works and Services The specifications and requirements are wholly described in the document set, tenders must be submitted via the electronic postbox available on www.etenders.gov by the response deadline. Only tenders submitted to the electronic postbox will be accepted, Tenders submitted by any other means (including but not limited to email, fax, post and or hand delivery) will NOT be …
View the procurement »
2023-05-17Provision of Vehicle Mounted Power Washers (Dublin City Council)
Dublin City Council wishes to establish a single-party framework agreement for the supply, delivery, maintenance and repair of 3 to 9 new Vehicle Mounted Power Washers for installation within, and utilization from our Light Goods Vehicles (LGV).
Additionally, the successful tenderer must provide repair/maintenance services for DCC's existing Power Washers when required.
View the procurement » Mentioned suppliers:Weidner Ireland Ltd
2023-03-07Pharmacy Robotic Dispensing System (The Adelaide & Meath Hospital, Dublin Incorporating The National Children's Hospital (AMNCH))
2.1 Optimal design suggestions to ensure maximum utilisation of current pharmacy footprint for optimum workflow. Optimal location for workflow if existing Pharmacy Aseptic Unit is dismantled leaving a new open plan store area
2.2 Detailed understanding of the facility requirements from TUH (e.g. power, air conditioning, etc.) required.
2.3 Options available and capacity for future growth with the Pharmacy Dept.
2.4 Options available to optimize ward based pharmacy requesting, storage and dispensing in …
View the procurement »
2023-02-20Upgrade (LeCheile Donnycarney Community & Youth Centre CLG)
Replacement of all external windows with double glazed high spec upvc. Replace of all external doors, both DG aluminium and solid fire doors. Replace current boilers with air-to-water heat pumps or most suitable for the premises. BMS upgrade Replace current lighting with low energy lights. Installation of 11kW solar pv panels Replace fixed speed circulation pumps with variable speed pumps
View the procurement »
2023-01-16Supply of HVAC Filters for Rolling Stock (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) is seeking to enter into a long-term supply agreement with a specialist company[s] with a demonstrable track record in the Supply of Rolling Stock HVAC Filters [Heating Ventilation and Air Conditioning].
The HVAC Filters must be compliant with the following standards:
• BS6853:1999 Code of Practice for Fire Precautions in the Design and Construction of Passenger Carrying Trains
• Railway Group Standard GM/RT2130: Vehicle Fire, Safety and Evacuation
• BS476 Part 7: Fire tests on …
View the procurement »
2022-12-14SPFA - Managed Document Print Service and Onsite Manned Print Room (Dublin City Council)
Dublin City Council (DCC) wishes to invite tenders using the Open Procedure to establish a Single Party Framework Agreement for the Provision of a managed document production service on a fleet of floor standing multi-functional devices (MFD’s) with SLA and the provision of an on-site manned print room.
The period of the framework agreement will be for 6 years in accordance with the provisions set out in Article 33.1 of Directive 2014/24/EU. The justification for a framework agreement longer than the …
View the procurement » Mentioned suppliers:Ricoh Ireland
2022-12-05Supply of Filters (All Fleet) (Dublin Bus / Bus Atha Cliath)
The purpose of this PQQ is to enable the Contacting Entity to evaluate the suitability of applicants and to arrive at a shortlist of potential suppliers.
The tender will be for three (3) years with the option of two twelve (12) month extensions.
This tender will operate as a multi-party framework agreement.
View the procurement »
2022-11-23Supply, Delivery, Installation, Maintenance of Crosslinker and balances for Forensic Science Ireland (Forensic Science Ireland)
Forensic Science Ireland, requires the Supply, Delivery, Installation, Maintenance of 16 UV Cross Linkers for eliminating PCR nucleic acid contamination for Forensic Science Ireland, Backweston Science Campus, Celbridge, Co. Kildare and
Supply, Delivery, Installation, Maintenance of
• FSI balances (5x top pan & 8 Analytical/Fine) and 13 x printers as follows
PAD = Require 1 Top pan & 1 Analytical, two printers total.
FP = Require 1 Top pan, one printer.
DNA = Require 1 Top pan & 1 Analytical.
CAD …
View the procurement »
2022-11-15Dublin City Council Heating Ventilation & Air Conditioning Commercial Maintenance Multi-Party Framework (Dublin City Council)
Dublin City Council (DCC) is seeking to establish a Multi-Party Framework Agreement for the procurement of works contractors for the Commercial Heating, Ventilation & Air Conditioning reactive and planned maintenance works in Dublin City Councils commercial / communal buildings in the Dublin City Council area citywide.
Applicants must demonstrate a clear understanding of the specific systems & equipment that are installed in the sites listed on the respective Category being applied for.
Category 1A, 1B, …
View the procurement »