2021-04-21Sale of Gas Turbine Equipment (Electricity Supply Board (ESB))
ESB is examining the potential for sale used V.94.2 gas turbine equipment that is no longer in use. Details of equipment on offer are available upon request. Request can be made via the e-tenders message system. This is one set of used (un-refurbished) fourth stage turbine vanes.
Interested parties should note that this selection process is not governed by the provisions of Directive 2004/18/EC or Directive 2004/17/EC (or the Irish regulations transposing those Directives) and ESB does not intend to …
View the procurement »
2021-04-16Rated Capacity Indicators and Height Limiters for Hydraulic Excavators (Office of Public Works (OPW))
Rated capacity Indicators and height limiters for hydraulic excavators:
Lot 1: Rated capacity indicator for 14-15 t hydraulic excavator;
Lot 2: Rated capacity indicator for 6-8 t hydraulic excavator;
Lot 3: Height limiter for 14-15 t hydraulic excavator;
Lot 4: Height limiter for 6-8 t hydraulic excavator.
Please see Appendix 1: Requirements and specification, starting on page 17 for more detail.
View the procurement »
2021-04-13Gantry Cranes for Portlaoise Depot — 2 Lots (Irish Rail)
Design, supply, delivery and commissioning of two new gantry cranes each with a lifting capacity 25 tonnes (lot 1).
Repair, refurbishment, and upgrade of two existing gantry cranes each with a lifting capacity 15 tonnes (lot 2).
View the procurement »
2021-04-07LGH1437C — IMR — Supply of a Metal Powder Bed Fusion Machine (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery and installation of a laser based metal powder bed fusion machine to be used in a research and development capacity in the area of product and component production. The equipment must fall under the ISO/ASTM 52900 -15 designation for a powder bed fusion machine in its architecture and operating principle. The tender also seeks required accessories and equipment that enable the safe and efficient operation of said machine. This should be inclusive of operational …
View the procurement » Mentioned suppliers:SLM Solutions Group AG
2021-03-26Supply of Solid-liquid Extractor for Aqueous Plant Extracts (BRID-Biorefinery Research, Implementation and Development Ltd)
Supply of solid-liquid extractor (e.g. screw extractor, screw press) for solid-liquid separation of fermented biomass to obtain an aqueous extract.
Lot 1: 1pcs, extractor for 4 000-4 600 kg/h;
Lot 2: 2 pcs, extractors each for 2 000-2 500 kg/h;
Lot 3: 1 pcs, extractor for 2 000-2 500 kg/h.
In order to enable the best possible (qualitative and economic) implementation, potential technology providers are invited to participate in this bidding procedure. The bidding procedure is carried out in two stages.
View the procurement »
2021-03-26Lieferung eines Fest-Flüssig-Extraktors (BRID-Biorefinery Research, Implementation and Development Ltd)
Lieferung eines Fest-Flüssig-Extraktors (z. B. Schneckenextraktor, Schneckenpresse) zur Fest-Flüssig-Trennung von fermentierter Biomasse, um einen wässrigen Extrakt zu erhalten. — LOT 1:1 Stk. Extraktor für 4 000 - 4 600 kg/h,
— LOT 2:2 Stk. Extraktoren für je 2 000 - 2 500 kg/h,
— LOT 3:1 Stk. Extraktor für 2 000 - 2 500 kg/h.
Um eine bestmögliche (qualitative und wirtschaftliche) Umsetzung zu ermöglichen, werden potentielle Technologieanbieter zur Teilnahme an diesem Bieterverfahren eingeladen. Das …
View the procurement »
2021-03-24Access Control Systems — Single Operator Framework Agreement (National University of Ireland, Galway (NUI Galway))
The purpose of this competition is to establish a single operator framework agreement relating to access control systems at NUI Galway. NUI Galway is committed to replacing existing GSD systems with access control systems in a range of campus locations on a phased basis as funding permits. Following a competitive tendering process in 2020, a single party framework agreement was established and the first phases of this replacement work were completed. As a result of additional funding secured, the initial …
View the procurement » Mentioned suppliers:OceanADV Ltd
2021-03-24IT Sligo — RFT for the Supply of a CNC Turning Centre/Lathe (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery and installation of a CNC Turning Centre/Lathe for the PEM Technology Gateway part-research unit in the Institute of Technology Sligo, under the remit of the department of engineering and design. This CNC Turning Centre/Lathe will be used to deliver R&D projects and high precision one-off prototypes for SME’s both locally and nationally. This machine should have multi-axis capabilities, Y Axis milling capabilities, driven tools on a multi-tool turret and …
View the procurement » Mentioned suppliers:HW Machine Tools
2021-03-23Supply and Install and Commission of Bogie Shop Cranes (Iarnrod Eireann-Irish Rail)
This notice replaces RFT 184264, TED Reference 2021/S 030-075313.
The previous notice was cancelled due to a technical error in the TED publication, the type of procedure used for this competition will be the negotiated procedure with a call for competition
Iarnród Éireann (IÉ) requires a competent and experienced company to supply and install and commission three new cranes and to remove and dispose of the three existing cranes within the Bogie Shop, Dublin 8.
The successful contractor will be …
View the procurement »
2021-02-24Supply and Delivery of Ribbed Track Baseplates (Iarnrod Eireann-Irish Rail)
Irish Rail ‘IE’ have an on-going requirement for the supply and delivery of the following ribbed baseplates:
• vertical ribbed baseplates Fabricated Steel Grade S275JR (EN10025) or Cast SG Grade EN-GJS-500-7 (EN1563),
• 1:40 ribbed baseplates Fabricated Steel Grade S275JR or Cast SG Grade EN-GJS-500-7.
Requirements will be on an ad-hoc basis but based on previous usage the estimated annual requirements would be in the region of:
— 500 No Vertical ribbed baseplates,
— 5000 No 1:40 ribbed baseplates.
View the procurement »
2021-02-22Supply and fitting of Washing Machines and Dryers to the Irish Defence Forces (Defence Forces Ireland)
1) Duration: The Framework agreement will be for an initial period of two (2) years with two (2) possible twelve (12) months extensions. The expected commencement will be March 2021. The total duration of the contract may not be longer than four (4) years.
All quotations must be in Euro (€) excluding VAT.
Price and quoting for all items
The price quoted in the tender form requests a fixed price for the duration of the contract. The inclusion of prices for alternative items, other than those specified in …
View the procurement » Mentioned suppliers:Murphy's Laundry Equipment Ltd
2021-02-16Depot Protection System (Iarnrod Eireann-Irish Rail)
Iarnród Éireann are seeking expressions of interest from suitable specialist vendors for the design and supply of depot protection systems in its maintenance depots, to alert staff to the movement of trains within CME maintenance buildings and depots. The project will require provision of new systems in Inchicore Running Shed and Connolly Valeting Plant, as well as the option to potentially increase the scope to include additional locations over the term of this contract. It should be noted that Irish …
View the procurement »
2021-02-09Supply of Wheel Boring Machine for Rolling Stock (Iarnrod Eireann-Irish Rail)
Wheel boring machine for rolling stock fleets
This is a call to competition by IE for the procurement of the design, supply, commissioning, installation, training, provision of consumable parts, calibration and maintenance of a CNC wheel boring machine for the finish machining of all of IÉ’s wheel pans (the ‘Contract’).
The machinery is required to be delivered, installed and commissioned at our Inchicore site. All maintenance, training and other work will occur at this site.
The machine will need to …
View the procurement » Mentioned suppliers:Geminis Lathes
2021-02-08Bogie Shop Cranes (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) requires the services of a competent and experienced company to supply and install and commission three new cranes and to remove and dispose of the three existing cranes within the Bogie Shop, Inchicore, Dublin 8. The Bogie Shop at Inchicore overhauls and produces bogies for all the Irish Rail passenger fleets.
The successful contractor will be responsible for any transport or civil works which may be required prior to removing and installing the cranes, all final measurements will …
View the procurement »
2020-12-23Supply of Evaporators for Aqueous Plant Extracts (BRID-Biorefinery Research, Implementation and Development Ltd)
Supply of a plant for the concentration of aqueous extracts from fermented biomass. The plant (evaporator 1 and evaporator 2) should be able to process a daily liquor volume of approx. 36 000 L/d with 8 % TS to a concentrate with approx. 70 % DM. In addition, a pilot plant (evaporator 3) for the evaporation of extracts with a capacity of 5 000-10 000 L/d is to be built, which is suitable for concentrating from 8 % DM up to 60 % DM.
View the procurement »
2020-12-23Lieferung von Verdampfer für wässrige Pflanzenextrakte (BRID-Biorefinery Research, Implementation and Development Ltd.)
Beschaffung von Anlagen zur Konzentrierung von wässrigen Extrakten aus fermentierter Biomasse. Die Anlage (Evaporator 1 und 2) soll eine tägliche Flottenmenge von ca. 36 000 L/d mit 8%TS zu einem Konzentrat mit ca. 70%TS verarbeiten können. Zusätzlich soll eine Pilotanlage (Evaporator 3 Pilot) zur Eindampfung von Extrakten mit einer Leistung von 5 000-10 000 L/d entstehen, die geeignet ist eine Konzentrierung von 8%TS- 60%TS durchzuführen. Die Anlagen zur Konzentrierung müssen folgende Anforderungen …
View the procurement »
2020-12-18Supply, Maintenance, and Support of Hydro Control Centre (HCC) SCADA Upgrade (Electricity Supply Board (ESB))
The contracting entity intends to procure a contract for the supply, maintenance, and support of Hydro Control Centre (HCC) SCADA Upgrade.It is proposed that the contract will include:
design, acquire the hardware, develop the software, assemble and work test, supply and deliver to the sites, erect, test at the sites, commission and optimise the HMI for the HCC SCADA system. It is not intended to replace the existing PLC’s and hardware which directly interface to the plant. The SCADA system shall …
View the procurement » Mentioned suppliers:Schneider Electric Systems UK Limited
2020-11-17LGH1295C - Teagasc — Supply of an Ultra High Temperature (UHT) Tubular/Steam Injection Heat Exchanger (Education Procurement Service (EPS))
Teagasc wishes to procure the supply, delivery, installation and maintenance of an ultra high temperature tubular/steam injection heat exchanger with options for DSI, cooling sections, holding sections, and aseptic sampling and aseptic homogenisation. The ultra high temperature tubular/steam injection heat exchanger must have a capacity of 50-200 kg/hr and be capable of handling viscous liquid food and dairy products, with temperature range 5-15 ºC and cooling capability < 10 ºC with variable holding tubes.
View the procurement » Mentioned suppliers:MicroThermics Inc
2020-11-16Provision of the Digital Factory at the National Advanced Manufacturing Centre (AMC), National Technology Park, Limerick (IDA Ireland)
To sustain and enhance the competitiveness of the Irish manufacturing sector, IDA Ireland is leading on the delivery of the National Advanced Manufacturing Centre (AMC) which it intends to deliver and operationalise by Q4 2021. The AMC is a strategic national priority and is aligned with Government’s Industry 4.0 (2020-2025) strategy.
The AMC shall become a national showcase and international exemplar for advanced manufacturing across Ireland’s discrete manufacturing base. It shall support manufacturing …
View the procurement » Mentioned suppliers:ABB Limited
2020-11-09Equipment for LIT Engineering Hub (Limerick Institute of Technology)
The Faculty of Applied Science, Engineering and Technology at Limerick Institute of Technology has identified a requirement for eight number Electro Pneumatic mobile training units which will be utilised by the apprentices within the mechanical automation maintenance fitting trade and by students from precision engineering and mechanical engineering programmes.
View the procurement » Mentioned suppliers:Didactic Services Ltd
2020-11-063D Bioprinter (Royal College of Surgeons in Ireland)
Request for supply and installation of a 3D Bioprinter for our laboratory whose research is focused on the fabrication of 3D regenerative biomaterial constructs.
The 3D Printer should be compatible with a range of bio-compatible and synthetic materials/bioinks. The temperature of the print shelf/bed should be adjustable. Multiple extruders/print heads required. Extruder temperature should be adjustable. High resolution printing in X, Y and Z directions is necessary for the fabrication of constructs with …
View the procurement » Mentioned suppliers:Regenhu SA
2020-11-04Request for Tenders for the Supply, Delivery, Installation, Removal and Maintenance of Equipment for Construction... (St Mary's C.B.S (Enniscorthy))
Proposals from tenderers are being sought to supply and deliver sustainable (where possible) products, install and remove/re-use and maintain construction studies, wood machining and preparation room and/or engineering and/or technology and drawing equipment and machinery in St Marys CBS, Enniscorthy. It is intended to award a contract to a single service provider for each of the lots, (Lot 1 to Lot 3). Tenderers must be able to supply each item on the specification list as per the lot tendered for as …
View the procurement »