2021-04-06Supply of Misc. Chassis and Suspension Components (Dublin Bus/Bus Atha Cliath)
The purpose of this pre-qualifying questionnaire (PQQ) is to enable the contracting entity to evaluate the suitability of applicants and to arrive at a shortlist of potential suppliers for a framework. It is intended that following the PQQ evaluation a number of applicants will be invited to tender for the specific requirements of the framework. The framework will be for a period of 3 years with a provision for two one year extensions. The value over the 5-year period is estimated at EUR 1.5 million.
View the procurement »
2021-03-24Furniture Transportation and Related Services — Single Operator Framework Agreement (National University of Ireland, Galway (NUI Galway))
The purpose of this competition is establish a single operator framework agreement for the provision of furniture transportation and related services as and when they are required at any of NUI Galway's locations. The transportation of furniture and equipment is an integral aspect of hosting the different types of events and activities each year at the University's main Galway City campus. A limited amount of this service can be provided in-house using University-owned vehicles, however the assistance of …
View the procurement » Mentioned suppliers:Martin Movers Ltd
2021-02-26Provision of Phlebotomy Services (Sport Ireland)
The ADU wishes to appoint a qualified phlebotomy organisation to assist with the following services (the ‘Services’):
• the taking of blood samples in both in and out of competition and completion of relevant paperwork for each blood sample;
• the supply of waste disposal services including the disposal of the used equipment as per current Environment, Waste and Health and Safety Legislation;
• the storage of blood sampling equipment and transport equipment;
• the preparation of transport equipment …
View the procurement » Mentioned suppliers:Biomed Diagnostics Ltd
2020-12-1820/097 — Step 1 — MEGG for Road Transportation of Natural and Renewable Gases (Ervia)
The design, manufacture, testing, certification, supply, delivery, commissioning and training in safe use of Multi Element Gas Containers (MEGC), for the transportation of natural and renewable gases by road.
• Lot 1 shall include but not be limited to the provision of MEGC’s with capacity 5 000 standard cubic meters (scm) +/- 20 % capable of transporting natural and renewable gases by road for the purpose of grid injection. The MEGC modules shall be mounted on ADR (International Carriage of Dangerous …
View the procurement »
2020-12-01Provision for Sanitising Supplies (An Post)
An Post has been classified as essential services during the Covid-19 pandemic. To protect the health and welfare of staff and to allow the business to function effectively under new restricted conditions, An Post has a requirement to supply staff with a range of protective equipment.
The requirement will be divided into 3 lots with An Post looking to enter into a multi-party framework agreement for each lot:
Lot 1: Hand sanitiser wall mounted dispensers and refills,
Lot 2: Hand sanitiser refills,
Lot 3: …
View the procurement »
2020-12-01Tender for the Provision of Dental Laboratory Services/Prostheses (Dublin Dental Hospital Board)
The Dublin Dental Hospital Board trading as the Dublin Dental University Hospital (DDUH) provides primary, secondary, and tertiary dental care as a national referral centre. Additionally the DDUH provides on-call services to the community and has links with all the major general hospitals in the Dublin region. The DDUH is the principal dental education, training and research institution in Ireland providing programmes across the full range of specialities in dentistry. The DDUH invites tenders for the …
View the procurement »
2020-11-27RFT - LGH1267CProvision of a Fluidised Bed, Dryer, Granulator and Coater System (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery, installation and calibration of a development scale fluidised bed, dryer, granulator and coater system. This enabled multi-purpose fluid bed system will facilitate the development of methods to automate and optimise fluid bed processes using process analytical technologies and advanced process automation and control approaches.
This system consists of the following:
• fluid bed granulation and drying processing system;
• near infrared spectrometer for moisture …
View the procurement » Mentioned suppliers:Innopharma Technology
2020-11-17LGH1295C - Teagasc — Supply of an Ultra High Temperature (UHT) Tubular/Steam Injection Heat Exchanger (Education Procurement Service (EPS))
Teagasc wishes to procure the supply, delivery, installation and maintenance of an ultra high temperature tubular/steam injection heat exchanger with options for DSI, cooling sections, holding sections, and aseptic sampling and aseptic homogenisation. The ultra high temperature tubular/steam injection heat exchanger must have a capacity of 50-200 kg/hr and be capable of handling viscous liquid food and dairy products, with temperature range 5-15 ºC and cooling capability < 10 ºC with variable holding tubes.
View the procurement » Mentioned suppliers:MicroThermics Inc
2020-11-13The Provision of Orthopaedic Trauma Drill Systems (Beaumont Hospital)
In the first instance, a managed equipment service contract of 5 years’ duration will be entered into with the successful tenderer,encompassing the provision of the Six (6) Trauma Drill Systems as detailed in this document, the provision of associated accessories for the Drill Systems and the provision of all related support to include the replacement of equipment as necessary.
View the procurement »
2020-11-13The Supply, Installation and Maintenance of a Breast Care Electronic Patient Record System (Beaumont Hospital)
The Contracting Authority intends to appoint a suitably-qualified and experienced economic operator to install, commission and support an appropriate Breast Care Electronic Patient Record (EPR) System, which will digitally record the patient’s journey from referral, through the services delivered by the Breast Care Centre and on to the patient’s follow up care plans.
The Contracting Authority anticipates that this competition will result in the establishment of a long-term partnership, whereby the …
View the procurement »
2020-11-12CHI invites Tenders via an Open Competitive Tender Process for the Provision of an Analyser (s) to Replace Current... (CHI Ireland)
This TENDER document defines the Department of Paediatric Laboratory Medicine’s (DPLM) requirements with respect to the capital purchase of an analyser (s) to replace current in use instrument(s) in the National Newborn Bloodspot Screening Laboratory (NNBSL) at Children's Health Ireland (CHI) at Temple Street, Temple Street, Dublin 1.
Tender incorporates a system which must be capable at a minimum of performing the following Newborn Bloodspot Screens (NBS) on 3.2 mm dried blood spot (DBS) samples.
1) …
View the procurement »
2020-10-23Invitation to Tender for the Provision and Support of Reagents and Associated Equipment for an Automated Indirect... (St James's Hospital)
The Immunology laboratory provides a range of indirect immunofluorescence (IIF) tests for the diagnosis and management of autoimmune conditions. This is a busy department and we provide IIF testing to patients of St James and other institutions. The service requires an automated slide processor capable of delivering a fully traceable process from pipetting samples and reagents to the capture and recording of images of the indirect immunofluoresent tests. All of the IIF tests should be fully automated on …
View the procurement » Mentioned suppliers:Syntec Scientific
2020-10-09Supply of X-Ray Unit (National Museum of Ireland)
The contracting authority has a requirement to replace an existing x-ray unit as it is no longer operational.
The current unit is both an instrument for recording, research and condition assessment within the museum and the NMI has also provided X-ray services for other agencies and cultural institutions such as the National Gallery, IMMA, Chester Beatty, and the Hugh Lane Gallery under the auspices of CNCI (Council of National Cultural Institutions). NMI also provides these X-ray facilities for private …
View the procurement » Mentioned suppliers:Labquip (Ireland) Ltd
2020-10-01LEE977C - UCD — Supply of an Atomic Force Microscope (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery, installation and maintenance of an atomic force microscope (AFM) for the surface imagining and atomic and close-to-atomic scale fabrication, for the UCD Center of Micro/Nano Manufacturing Technology (MNMT-Dublin). The equipment should be capable of scratching the surface of the work piece with precision and consistency in air, fluid and electrical or chemically reactive environments. The images can also be scanned with sub-nanometer resolution. The instrument …
View the procurement » Mentioned suppliers:Bruker UK Ltd
2020-09-21Supply of Refillable Hand Sanitiser Dispensing Units and Hand Sanitising Gel/Foam (Iarnrod Eireann-Irish Rail)
This is a call to competition by IE for the procurement to provide circa 350 wall mounted refillable hand sanitiser dispensing units and circa 110 refillable free-standing/floor mounted hand santiser dispensing units. In conjunction with the aforementioned dispensing units IÉ are also procuring hand sanitiser gel/foam which must be compatible with the dispensing units. Currently IÉ are forecasting consumption to be circa 600 litres per week for 52 weeks initially. IÉ will take responsibility for the …
View the procurement » Mentioned suppliers:Creative Activity
2020-09-18Filling Line and Barrier System (National Institute for Bioprocessing Research and Training (NIBRT))
The National Institute of Bioprocessing Research and Training (NIBRT) are planning an extensive upgrade to our current clinical trials-scale vial filling line within our fill finish suite. We intend to better align with the training needs of our clients by keeping up-to-date with the latest technologies in the areas of fill and finish, by obtaining a filling line which can adapt to filling a variety of containers, i.e. vials, syringes and cartridges.
View the procurement »
2020-09-08UCC — High Performance Focused Ion Beam Milling Capability (Education Procurement Service (EPS))
The Specialty Products and Services Centre (SP&S) at Tyndall National Institute, UCC, carry out analysis on a wide variety of semiconductor devices, ranging from traditional silicon microelectronics and Silicon MEMS to III-V photonic devices. We wish to extend our capability in the area of focused ion beam (which can encompass Gallium beam/plasma/laser milling or a combination thereof) by purchasing a fully functional load locked system including pumps which will allow us to move our processing to a …
View the procurement » Mentioned suppliers:TESCAN-UK Ltd
2020-09-04Next Generation Ticketing (National Transport Authority)
The authority intends to procure a nationwide multi-modal Account Based Ticketing (ABT) system supporting both public and private operated transport services, with the eventual aim of enabling the provision of Mobility as a Service 'MaaS' type offerings. The solution is expected to include the delivery of a fully functioning and fit for purpose ABT back office system including all necessary equipment, hosting, software, services and supporting systems. The solution is also expected to include the supply, …
View the procurement »