Procurements: Paper, printing and bookbinding machinery and parts
One active procurement
Paper, printing and bookbinding machinery and parts have been procured by organizations such as Education Procurement Service (EPS), Houses of the Oireachtas Service, and Education Procurement Service EPS.
Historically, suppliers within this area have been Hacketts, Ronayne Hire & Hardware, SG Education, 3D Technology Ltd, Aconity3D GmbH, Anglo Printers Ltd, Cantec Business Technology, Central Technology Supplies.ie, Character Print, and Codex Limited.
- Industrial machinery (>20 new procurements)
- Miscellaneous general and special-purpose machinery (6)
- Miscellaneous special-purpose machinery (4)
- Paper, printing and bookbinding machinery and parts (1) ⬅️
Recent procurements of paper, printing and bookbinding machinery and parts in Ireland
2026-04-24
Deadline 2026-05-16
Supply, Delivery, Installation and Commissioning of Offset Printing Press (Browne Printers Ltd (CA))
Browne Printers Ltd invites tenders for the supply, delivery, installation and commissioning of a sheetfed offset printing press The equipment must be suitable for high-volume commercial printing and include all necessary installation, commissioning, operator training, and warranty/support services. Full specifications and requirements are detailed in the tender documentation. View the procurement »
Browne Printers Ltd invites tenders for the supply, delivery, installation and commissioning of a sheetfed offset printing press The equipment must be suitable for high-volume commercial printing and include all necessary installation, commissioning, operator training, and warranty/support services. Full specifications and requirements are detailed in the tender documentation. View the procurement »
2026-03-10
UCDOPP5569 Multifunction Devices and Printers, and Associated Services (University College Dublin ( UCD ))
UCD is seeking to appoint a suitable experienced Contractor to provide Multifunction Devices and Printers, and Associated Services to University College Dublin as follows: (i) Supply of equipment for the Student and Staff print/copy/scan (Copi-Print UCD). (ii) Supply of equipment for purchase by UCD staff (iii) Maintain the existing portfolio of equipment – see UCDOPP5569 Existing Equipment Asset Register (iv) Provide full time Service Manager and part time Staff Member View the procurement »
UCD is seeking to appoint a suitable experienced Contractor to provide Multifunction Devices and Printers, and Associated Services to University College Dublin as follows: (i) Supply of equipment for the Student and Staff print/copy/scan (Copi-Print UCD). (ii) Supply of equipment for purchase by UCD staff (iii) Maintain the existing portfolio of equipment – see UCDOPP5569 Existing Equipment Asset Register (iv) Provide full time Service Manager and part time Staff Member View the procurement »
2026-02-20
Pro321 - Provision of Managed Print Services to the LDA (The Land Development Agency)
The Land Development Agency (LDA) is seeking tenders for the establishment of a Single Party Framework for the provision of Managed Print Services to its offices nationwide. Please refer to the RFT for full details of the scope of services required. View the procurement »
The Land Development Agency (LDA) is seeking tenders for the establishment of a Single Party Framework for the provision of Managed Print Services to its offices nationwide. Please refer to the RFT for full details of the scope of services required. View the procurement »
2026-02-13
Defence Forces Production Printer + Office Printer (Irish Defence Forces_1144)
Defence Forces Production Printer + Office Printer View the procurement »
Defence Forces Production Printer + Office Printer View the procurement »
2026-01-28
Call for Tenders for the supply, delivery, installation and maintenance of tools and equipment for T4 subjects to... (F.C.J. Secondary School Bunclody)
The Board of Management of F.C.J. Secondary School, Bunclody, Co. Wexford (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 05/05/2026. In summary, the Goods comprise: Tools and Equipment for the teaching of T4 subjects (Applied Technology-Technology, Construction Studies, Wood … View the procurement »
The Board of Management of F.C.J. Secondary School, Bunclody, Co. Wexford (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 05/05/2026. In summary, the Goods comprise: Tools and Equipment for the teaching of T4 subjects (Applied Technology-Technology, Construction Studies, Wood … View the procurement »
2026-01-08
Call for Tenders for the supply, delivery, installation and maintenance of tools and equipment for T4 subjects to... (St. Louis Secondary School (Monaghan))
This public procurement competition will be divided into [3] Lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided in the specification and descriptions documents accompanying this CFT document and must provide the relevant price in the Excel pricing worksheet also. An incomplete Lot will not be considered. Lot 1 - Applied Technology/Technology Lot 2 - Design and … View the procurement »
This public procurement competition will be divided into [3] Lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided in the specification and descriptions documents accompanying this CFT document and must provide the relevant price in the Excel pricing worksheet also. An incomplete Lot will not be considered. Lot 1 - Applied Technology/Technology Lot 2 - Design and … View the procurement »
2025-11-28
Call for Tenders for the supply, delivery, installation and maintenance of tools and equipment for T4 subjects to... (Nano Nagle College)
The Board of Management of Nano Nagle College (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 30th April 2025. In summary, the Goods comprise: Tools and Equipment for the teaching of T4 Subjects -Engineering, Graphics, Construction Studies, Design and Communication Graphics, Wood … View the procurement »
The Board of Management of Nano Nagle College (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 30th April 2025. In summary, the Goods comprise: Tools and Equipment for the teaching of T4 Subjects -Engineering, Graphics, Construction Studies, Design and Communication Graphics, Wood … View the procurement »
2025-11-07
Call for Tenders for the supply and installation of T4 Subjects (Construction and Wood Tech, Graphics Design, Wood... (Meanscoil Iognaid Ris (Naas CBS))
The Board of Management of Meánscoil Iognáid Rís (Naas CBS) (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 15th January 2026. In summary, the Goods comprise: Tools and Equipment for the teaching of Construction Studies/Wood Technology, Graphics, and Machinery/Preparation based, … View the procurement »
The Board of Management of Meánscoil Iognáid Rís (Naas CBS) (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 15th January 2026. In summary, the Goods comprise: Tools and Equipment for the teaching of Construction Studies/Wood Technology, Graphics, and Machinery/Preparation based, … View the procurement »
2025-09-23
Defence Forces Perfect Binder / Automatic Block Feeder (Irish Defence Forces_1144)
The Irish Defence Forces invites tenders to the request for tender from economic operators for the goods "perfect Binder with automatic block feeder View the procurement »
The Irish Defence Forces invites tenders to the request for tender from economic operators for the goods "perfect Binder with automatic block feeder View the procurement »
2025-07-23
Supply and Deliver a Bespoke Modular Belt Drying Equipment and Associated Components as specified (Arti Biochar Ireland Limited)
Arti Biochar Ireland Limited, Strokestown, Co Roscommon seeks quotes from suppliers for the Supply and Deliver a Bespoke Modular Belt Drying Equipment and associated components , this equipment must be delivered to and fully commissioned at the premises at address supplied. Please refer to the tender documents provided for full details of specification and instructions to tender. View the procurement »
Arti Biochar Ireland Limited, Strokestown, Co Roscommon seeks quotes from suppliers for the Supply and Deliver a Bespoke Modular Belt Drying Equipment and associated components , this equipment must be delivered to and fully commissioned at the premises at address supplied. Please refer to the tender documents provided for full details of specification and instructions to tender. View the procurement »
2025-05-14
Single-Party Framework Agreement for Provision of Maintenance and Support Services for Existing Printing Devices and... (Pobal)
The Contracting Authority seeks to establish a single party framework agreement with a suitably qualified tenderer for the provision of maintenance and support services for existing printing devices and the provision, Installation, maintenance and support of new printing devices on a rental basis and invites submissions for economic entities to provides these services and supplies. Full details of the specific requirements are as set out in the tender documents. View the procurement »
The Contracting Authority seeks to establish a single party framework agreement with a suitably qualified tenderer for the provision of maintenance and support services for existing printing devices and the provision, Installation, maintenance and support of new printing devices on a rental basis and invites submissions for economic entities to provides these services and supplies. Full details of the specific requirements are as set out in the tender documents. View the procurement »
2024-07-23
LA3018C - RFT for the Supply, Delivery, Installation and Calibration of Directed Energy Deposition (DED) Metal 3D... (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery, installation, and calibration of Directed Energy Deposition (DED) Metal 3D Printing Equipment and any ancillaries necessary for the operation of the equipment. The equipment will be placed in the PEM Technology Gateway, which will be an excellent addition to our facilities at Atlantic Technological University. It will be used for research activities as well as industry engagement, training, and demonstrations in education and industry. View the procurement »
Tenders are sought for the supply, delivery, installation, and calibration of Directed Energy Deposition (DED) Metal 3D Printing Equipment and any ancillaries necessary for the operation of the equipment. The equipment will be placed in the PEM Technology Gateway, which will be an excellent addition to our facilities at Atlantic Technological University. It will be used for research activities as well as industry engagement, training, and demonstrations in education and industry. View the procurement »
2024-03-05
High Temperature polymer composite 3D printer (University College Dublin ( UCD ))
The I-Form Centre at UCD, carries out research on the printing of polymers and composites. The Centre has a particular focus on the use of in-situ monitoring to facilitate enhanced print process control. The requested high temperature polymer / composite 3D printer will allow the group to compete with leading research groups in 3D printing of high-performance thermoplastic polymers such as PEEK, PEKK, etc., and their fiber reinforced composites for use in industry sectors such as medical device and … View the procurement »
The I-Form Centre at UCD, carries out research on the printing of polymers and composites. The Centre has a particular focus on the use of in-situ monitoring to facilitate enhanced print process control. The requested high temperature polymer / composite 3D printer will allow the group to compete with leading research groups in 3D printing of high-performance thermoplastic polymers such as PEEK, PEKK, etc., and their fiber reinforced composites for use in industry sectors such as medical device and … View the procurement »
2024-02-29
LA2789C TUS Supply, Delivery, Installation and Commissioning of a Multi Jet Fusion 3D Printer (Education Procurement Service (EPS))
In summary the goods required are: 1 (One) Multi Jet Fusion (MJF) 3D printing system The Multi Jet Fusion (MJF) 3D printing system should include: • MJF 3D printer • 3D Processing Station • 3D Build Unit • External tank starter kit • 3D Printer Initial Maintenance Kit • 3D Processing Station Initial Maintenance Kit View the procurement »
In summary the goods required are: 1 (One) Multi Jet Fusion (MJF) 3D printing system The Multi Jet Fusion (MJF) 3D printing system should include: • MJF 3D printer • 3D Processing Station • 3D Build Unit • External tank starter kit • 3D Printer Initial Maintenance Kit • 3D Processing Station Initial Maintenance Kit View the procurement »
2024-01-29
RTÉ Printer Managed Service Support and Upgrade (Raidio Teilifis Eireann ( RTÉ ))
RTÉ invites submissions, from suitably qualified Tenderers to supply a fully managed service, providing printer service support, upgrade and photocopying facilities for sites in Ireland. This tender seeks to establish a new contract which will provide an enhanced, value for money print and copy service to users while improving operational efficiency and controlling costs. The estimated value of the contract is for the potential term of the contract. View the procurement »
RTÉ invites submissions, from suitably qualified Tenderers to supply a fully managed service, providing printer service support, upgrade and photocopying facilities for sites in Ireland. This tender seeks to establish a new contract which will provide an enhanced, value for money print and copy service to users while improving operational efficiency and controlling costs. The estimated value of the contract is for the potential term of the contract. View the procurement »
2023-10-09
Supply, Delivery and Commissioning of a Photonic 3D Microfabrication Printing System for Tyndall National Institute,... (University College Cork)
The photonic Packaging Group at the Tyndall National Institute is seeking to purchase equipment that will enable the 3D printing of spherical, aspherical, freeform and compound micro-optical elements on both optical fibers and photonic integrated circuits (PICs). The Photonic 3D printing system will be a key enabler for advanced photonics packaging research and will have applications in communications, life-science and critically, quantum computing, where such micro-optics can solve critical … View the procurement »
The photonic Packaging Group at the Tyndall National Institute is seeking to purchase equipment that will enable the 3D printing of spherical, aspherical, freeform and compound micro-optical elements on both optical fibers and photonic integrated circuits (PICs). The Photonic 3D printing system will be a key enabler for advanced photonics packaging research and will have applications in communications, life-science and critically, quantum computing, where such micro-optics can solve critical … View the procurement »
2023-09-27
Single Supplier framework for the Supply, Delivery, Installation and Commission of Sewing Machines and Supplies... (Irish Prison Service)
Single Supplier framework for the Supply, Delivery, Installation and Commission of Sewing Machines and Supplies across the Irish Prison Service Estate. View the procurement »
Single Supplier framework for the Supply, Delivery, Installation and Commission of Sewing Machines and Supplies across the Irish Prison Service Estate. View the procurement »
2023-09-27
LA2648C UCC - RFT for the Supply of a Printed Electronics Manufacturing System (PEMS) (Education Procurement Service EPS)
Tenders are sought for the supply, delivery, and installation of a standalone Printed Electronics Manufacturing System (PEMS) for rapid prototyping of 3D electronics, RF components, packages, and antennas. To assist the Tenderer, Tyndall has drawn up performance manufacturing specifications for the required PEMS that are detailed in the subsequent sections, which are considered as targets to be achieved by the Tenderer. The specifications detailed in this document are for a PEMS which will be used to … View the procurement »
Tenders are sought for the supply, delivery, and installation of a standalone Printed Electronics Manufacturing System (PEMS) for rapid prototyping of 3D electronics, RF components, packages, and antennas. To assist the Tenderer, Tyndall has drawn up performance manufacturing specifications for the required PEMS that are detailed in the subsequent sections, which are considered as targets to be achieved by the Tenderer. The specifications detailed in this document are for a PEMS which will be used to … View the procurement »
2023-08-09
Supply and Maintenance of Passport Production Equipment, Supply of Passports and Travel Documents (Department of Foreign Affairs/An Roinn Gnóthaí Eachtracha)
The Minister for Foreign Affairs invites expressions of interest to this pre-qualification questionnaire from economic operators for the Supply and Maintenance of Passport Production Equipment, Supply of Passports and Travel Documents as described in this PQQ. View the procurement »
The Minister for Foreign Affairs invites expressions of interest to this pre-qualification questionnaire from economic operators for the Supply and Maintenance of Passport Production Equipment, Supply of Passports and Travel Documents as described in this PQQ. View the procurement »
2023-06-26
LA2411C – University of Galway - RFT for the Supply, Delivery, Installation, and Commissioning of a Multimaterial... (Education Procurement Service EPS)
Tenders are sought by the library-based makerspace, University of Galway, for the Supply, Delivery, Installation, and Commissioning Bench top droplet-based printing system capable of printing in XY plane. Multimaterial functionality. Integrated drop watching capability. Mechanical drop formation and dispensing. Enclosed system. The system must be capable of taking a design from a computer (CAD) and to translate this into a computer aided manufacturing (CAM) functionality to produce print patterns. The … View the procurement »
Tenders are sought by the library-based makerspace, University of Galway, for the Supply, Delivery, Installation, and Commissioning Bench top droplet-based printing system capable of printing in XY plane. Multimaterial functionality. Integrated drop watching capability. Mechanical drop formation and dispensing. Enclosed system. The system must be capable of taking a design from a computer (CAD) and to translate this into a computer aided manufacturing (CAM) functionality to produce print patterns. The … View the procurement »
2023-06-22
LA2589C – ATU Sligo - RFT for the Supply, Delivery, Installation and Calibration of Metal 3D Printing Equipment (Education Procurement Service EPS)
Tenders are sought for the supply, delivery, installation, and calibration of Metal 3D printing Equipment and required ancillaries, including the procurement of a metal 3D printer with a wet/dry vacuum cleaner, wet separator, PPE, and materials starter kit. This cell must comply with all relevant safety standards and be able to 3D print using a range of engineering metallic materials. Details of the desired equipment for the Metal 3D printing cell are laid out below. Suppliers MUST provide all … View the procurement »
Tenders are sought for the supply, delivery, installation, and calibration of Metal 3D printing Equipment and required ancillaries, including the procurement of a metal 3D printer with a wet/dry vacuum cleaner, wet separator, PPE, and materials starter kit. This cell must comply with all relevant safety standards and be able to 3D print using a range of engineering metallic materials. Details of the desired equipment for the Metal 3D printing cell are laid out below. Suppliers MUST provide all … View the procurement »
2023-04-18
LA2416C UCC RFT for the Supply of a Photonic 3D microfabrication printing system (Education Procurement Service (EPS))
Tenders are sought for the Supply, Delivery and Commissioning of a Photonic 3D microfabrication printing system, Tyndall National Institute, University College Cork (UCC). View the procurement »
Tenders are sought for the Supply, Delivery and Commissioning of a Photonic 3D microfabrication printing system, Tyndall National Institute, University College Cork (UCC). View the procurement »
2023-02-24
EQ2421F- Framework Agreement for the Provision of General Printing Services for University of Limerick up to and... (Education Procurement Service (EPS))
The procurement competition relates to the establishment of a multi supplier Framework Agreements for the provision of General Printing Services for University of Limerick up to and including €2,000 (ex-vat). The Goods required under this RFT are up to and including €2,000 (ex-vat) printing requirements (“General Print Services”) of UL including but not limited to booklets, brochures, catalogues, manuals, reports, newsletters, posters, continuation sheets, NCRs, CAD drawings, binding, laminating, … View the procurement »
The procurement competition relates to the establishment of a multi supplier Framework Agreements for the provision of General Printing Services for University of Limerick up to and including €2,000 (ex-vat). The Goods required under this RFT are up to and including €2,000 (ex-vat) printing requirements (“General Print Services”) of UL including but not limited to booklets, brochures, catalogues, manuals, reports, newsletters, posters, continuation sheets, NCRs, CAD drawings, binding, laminating, … View the procurement »
2022-12-14
SPFA - Managed Document Print Service and Onsite Manned Print Room (Dublin City Council)
Dublin City Council (DCC) wishes to invite tenders using the Open Procedure to establish a Single Party Framework Agreement for the Provision of a managed document production service on a fleet of floor standing multi-functional devices (MFD’s) with SLA and the provision of an on-site manned print room. The period of the framework agreement will be for 6 years in accordance with the provisions set out in Article 33.1 of Directive 2014/24/EU. The justification for a framework agreement longer than the … View the procurement »
Dublin City Council (DCC) wishes to invite tenders using the Open Procedure to establish a Single Party Framework Agreement for the Provision of a managed document production service on a fleet of floor standing multi-functional devices (MFD’s) with SLA and the provision of an on-site manned print room. The period of the framework agreement will be for 6 years in accordance with the provisions set out in Article 33.1 of Directive 2014/24/EU. The justification for a framework agreement longer than the … View the procurement »
2022-11-03
Multi Supplier Framework for the supply of Classroom Equipment for Donegal ETB (Donegal Education and Training Board)
Donegal Education and Training Board seek tenders for the establishment of a multi supplier framework for the supply, delivery, installation and commissioning of classroom equipment as per the Department of Education’s Post Primary Equipment Lists and any other equipment requirements that may arise. The requirement for equipment will be as and when needed. View the procurement »
Donegal Education and Training Board seek tenders for the establishment of a multi supplier framework for the supply, delivery, installation and commissioning of classroom equipment as per the Department of Education’s Post Primary Equipment Lists and any other equipment requirements that may arise. The requirement for equipment will be as and when needed. View the procurement »
2022-10-28
National Service Desk Printer Support & Maintenance Agreement (Health Service Executive (HSE))
Printer Support & Maintenance Agreement for the National Service Desk View the procurement »
Printer Support & Maintenance Agreement for the National Service Desk View the procurement »
2022-07-27
P18236 Provision of Print Graphics Services (daa plc)
Provision of Print Graphics Services View the procurement »
Provision of Print Graphics Services View the procurement »
2022-01-19
KCETB invite applications for the establishment of a Single Party Framework Agreement, per lot for the... (Kilkenny and Carlow ETB)
Kilkenny and Carlow Education and Training Board invite applications for the establishment of a Single Party Framework Agreement, per lot, for the supply, delivery, installation, commissioning, training and maintenance/servicing (where applicable) of equipment in 6 Lots, for schools and centres under its remit. KCETB have a number of capital building projects where equipment from these lots may be required over the term of the framework. All KCETB schools and centres can drawdown on the framework … View the procurement »
Kilkenny and Carlow Education and Training Board invite applications for the establishment of a Single Party Framework Agreement, per lot, for the supply, delivery, installation, commissioning, training and maintenance/servicing (where applicable) of equipment in 6 Lots, for schools and centres under its remit. KCETB have a number of capital building projects where equipment from these lots may be required over the term of the framework. All KCETB schools and centres can drawdown on the framework … View the procurement »
2021-11-29
Manufacture of Organic Granulated Fertilizer Equipment (Closed Circle Ltd)
This is a tender request for a production processing plant capable of producing spherical granules from animal manures. View the procurement »
This is a tender request for a production processing plant capable of producing spherical granules from animal manures. View the procurement »
2021-09-17
Request for tender for the supply, delivery, installation and commissioning of Robotic 3D Metal Print Engine (Louth and Meath Education & Training Board)
LMETB invite submissions to this request for tender for the supply, delivery, installation and commissioning of Robotic 3D Metal Print Engine as per the attached documents. View the procurement »
LMETB invite submissions to this request for tender for the supply, delivery, installation and commissioning of Robotic 3D Metal Print Engine as per the attached documents. View the procurement »
2021-04-07
LGH1437C — IMR — Supply of a Metal Powder Bed Fusion Machine (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery and installation of a laser based metal powder bed fusion machine to be used in a research and development capacity in the area of product and component production. The equipment must fall under the ISO/ASTM 52900 -15 designation for a powder bed fusion machine in its architecture and operating principle. The tender also seeks required accessories and equipment that enable the safe and efficient operation of said machine. This should be inclusive of operational … View the procurement »
Tenders are sought for the supply, delivery and installation of a laser based metal powder bed fusion machine to be used in a research and development capacity in the area of product and component production. The equipment must fall under the ISO/ASTM 52900 -15 designation for a powder bed fusion machine in its architecture and operating principle. The tender also seeks required accessories and equipment that enable the safe and efficient operation of said machine. This should be inclusive of operational … View the procurement »
2020-11-06
3D Bioprinter (Royal College of Surgeons in Ireland)
Request for supply and installation of a 3D Bioprinter for our laboratory whose research is focused on the fabrication of 3D regenerative biomaterial constructs. The 3D Printer should be compatible with a range of bio-compatible and synthetic materials/bioinks. The temperature of the print shelf/bed should be adjustable. Multiple extruders/print heads required. Extruder temperature should be adjustable. High resolution printing in X, Y and Z directions is necessary for the fabrication of constructs with … View the procurement »
Request for supply and installation of a 3D Bioprinter for our laboratory whose research is focused on the fabrication of 3D regenerative biomaterial constructs. The 3D Printer should be compatible with a range of bio-compatible and synthetic materials/bioinks. The temperature of the print shelf/bed should be adjustable. Multiple extruders/print heads required. Extruder temperature should be adjustable. High resolution printing in X, Y and Z directions is necessary for the fabrication of constructs with … View the procurement »
2020-06-02
The Supply of a Monochrome Print Solution (Office of the Revenue Commissioners)
The Office of the Revenue Commissioners invites tenders from economic operators for the supply, installation and maintenance of a Monochrome Print Solution in the Revenue Data Centre, St John’s Road West, Kilmainham, Dublin 8, Ireland. View the procurement »
The Office of the Revenue Commissioners invites tenders from economic operators for the supply, installation and maintenance of a Monochrome Print Solution in the Revenue Data Centre, St John’s Road West, Kilmainham, Dublin 8, Ireland. View the procurement »
2020-02-17
The Provision of Managed Print Services (Mayo, Sligo and Leitrim ETB)
Mayo Sligo Leitrim ETB invites tenders to this request for tender from economic operators for the provision of managed print services. The basic principal of the managed print service for this competition is that they successful tenderer will provide a total office print solution on a all-inclusive per printed page/image basis. View the procurement »
Mayo Sligo Leitrim ETB invites tenders to this request for tender from economic operators for the provision of managed print services. The basic principal of the managed print service for this competition is that they successful tenderer will provide a total office print solution on a all-inclusive per printed page/image basis. View the procurement »
2020-01-23
Request for Tender for the Supply and Delivery of Stationery and Office Supplies for An Garda Síochána (An Garda Síochána)
This public procurement competition will be divided into 5 lots (each a ‘Lot’) as described below. Each lot will result in a separate contract. Lot 1: Stationery and Office Supplies; Lot 2: Supplies for Binding Machines; Lot 3: DVD+R; Lot 4: Double Gusset Folders; Lot 5: Printing. View the procurement »
This public procurement competition will be divided into 5 lots (each a ‘Lot’) as described below. Each lot will result in a separate contract. Lot 1: Stationery and Office Supplies; Lot 2: Supplies for Binding Machines; Lot 3: DVD+R; Lot 4: Double Gusset Folders; Lot 5: Printing. View the procurement »
2020-01-17
ESS033F-Multi-Supplier Framework Provision of General Printing Services between 2 000 EUR-24 999 EUR for The... (Education Procurement Service (EPS))
The procurement competition relates to the establishment of a multi supplier framework agreements for the provision of general printing services for University of Limerick from > 2 000 EUR-24 999 EUR. Out of scope: the goods required under this RFT will not include general stationery (example pens), paper supplies (for photocopiers) and blank envelopes as already provided for by the Office of Government Procurement under existing central state contracts. They also exclude individual procurement for … View the procurement »
The procurement competition relates to the establishment of a multi supplier framework agreements for the provision of general printing services for University of Limerick from > 2 000 EUR-24 999 EUR. Out of scope: the goods required under this RFT will not include general stationery (example pens), paper supplies (for photocopiers) and blank envelopes as already provided for by the Office of Government Procurement under existing central state contracts. They also exclude individual procurement for … View the procurement »
2019-10-21
LEE755C — RFT for the Supply of an Additive Printing Platform for Electronic PCB’s Platform for UL (Education Procurement Service (EPS))
CONFIRM has recently secured funding to develop an additive smart printing system development platform for electronic circuitry at their R&D site located in Limerick. A key component of this platform is an additive printing platform for materials deposition that allows the 2-D and quasi 3-D printing of a range of materials, metals, circuits, polymers and biomaterials. The system will be used to develop a range of smart technologies for the IOT and communication industries. View the procurement »
CONFIRM has recently secured funding to develop an additive smart printing system development platform for electronic circuitry at their R&D site located in Limerick. A key component of this platform is an additive printing platform for materials deposition that allows the 2-D and quasi 3-D printing of a range of materials, metals, circuits, polymers and biomaterials. The system will be used to develop a range of smart technologies for the IOT and communication industries. View the procurement »
2019-03-22
UL — Supply of Managed Print Services for the University of Limerick (1) (Education Procurement Service (EPS))
Tenders are sought for the supply of managed print services for student and staff printing (Lot 1) and the central print room (Lot 2) located in the University of limerick. It is intended that this contract will service all University of Limerick (UL) colleges, schools, administrative and service offices, and University research institutes, centres, and units, both on and off the main campus in Castletroy, Limerick. Due to possible continued expansion there may be a requirement for additional new devices … View the procurement »
Tenders are sought for the supply of managed print services for student and staff printing (Lot 1) and the central print room (Lot 2) located in the University of limerick. It is intended that this contract will service all University of Limerick (UL) colleges, schools, administrative and service offices, and University research institutes, centres, and units, both on and off the main campus in Castletroy, Limerick. Due to possible continued expansion there may be a requirement for additional new devices … View the procurement »
2019-03-22
UL — Supply of Managed Print Services for the University of Limerick (Education Procurement Service (EPS))
Tenders are sought for the supply of managed print services for student and staff printing (Lot 1) and the central print room (Lot 2) located in the University of limerick. It is intended that this contract will service all University of Limerick (UL) colleges, schools, administrative and service offices, and University research institutes, centres, and units, both on and off the main campus in Castletroy, Limerick. Due to possible continued expansion there may be a requirement for additional new devices … View the procurement »
Tenders are sought for the supply of managed print services for student and staff printing (Lot 1) and the central print room (Lot 2) located in the University of limerick. It is intended that this contract will service all University of Limerick (UL) colleges, schools, administrative and service offices, and University research institutes, centres, and units, both on and off the main campus in Castletroy, Limerick. Due to possible continued expansion there may be a requirement for additional new devices … View the procurement »
2018-08-23
LEE523C- RFT for the Supply and Installation of a 400 W Metal Additive Manufacturing Equipment (Education Procurement Service (EPS))
Tenders are sought for the supply and installation of a 400 W (at workpiece surface) metal AM system with a 250 x 250 x 300 build envelope and suitable for the printing of multiple materials. To use this system to educate and train students and industry representatives in the use of metal 3D additive manufacturing technology. To develop standards for the industrial application of Metal AM. Know the various additive manufacturing techniques and materials. View the procurement »
Tenders are sought for the supply and installation of a 400 W (at workpiece surface) metal AM system with a 250 x 250 x 300 build envelope and suitable for the printing of multiple materials. To use this system to educate and train students and industry representatives in the use of metal 3D additive manufacturing technology. To develop standards for the industrial application of Metal AM. Know the various additive manufacturing techniques and materials. View the procurement »
2018-08-03
Invitation to Tender for a Multi-Supplier Framework Agreement for the Supply and Maintenance of Portable Devices and... (National Transport Authority)
The Authority proposes to establish a multi-party Framework Agreement for the supply and maintenance of portable devices and associated software services. The deliverables are divided into three lots: — Lot 1: —— supply of portable devices, which includes a range of mobile terminals and printers, each with necessary accessories; —— provision of an internet hosted Device Management Service (DMS) to manage and monitor the portable devices; and —— maintenance and support of the hardware and software … View the procurement »
The Authority proposes to establish a multi-party Framework Agreement for the supply and maintenance of portable devices and associated software services. The deliverables are divided into three lots: — Lot 1: —— supply of portable devices, which includes a range of mobile terminals and printers, each with necessary accessories; —— provision of an internet hosted Device Management Service (DMS) to manage and monitor the portable devices; and —— maintenance and support of the hardware and software … View the procurement »
2018-06-20
ESS024C-DIT-Wood Manufacturing and Finishing Equipment (Education Procurement Service (EPS))
Lot 1: — surface planer 2 — thicknesser 2 — chisle 4 — round end tenorer 1 — speed sander 1 — veneer guillotine 1 — up cut saw 1 — band re-saw 1 Lot 2: — panel saw 1 — single end teneror 1 — spindle moulder 5 Lot 3: — CNC router 1 View the procurement »
Lot 1: — surface planer 2 — thicknesser 2 — chisle 4 — round end tenorer 1 — speed sander 1 — veneer guillotine 1 — up cut saw 1 — band re-saw 1 Lot 2: — panel saw 1 — single end teneror 1 — spindle moulder 5 Lot 3: — CNC router 1 View the procurement »
2018-03-05
Request for Tenders for the Supply, Installation and Maintenance of Printing Equipment for the Houses of the... (Houses of the Oireachtas Service)
The Houses of the Oireachtas Commission invites tenders for the supply, installation and maintenance of Printing Equipment for the Houses of the Oireachtas Print Facility. This RFT will be divided into 5 Lots as follows: Lot 1: B2 Plate Making Device; Lot 2: 4 Colour Printing Press; Lot 3: B2 Folding Machine, SRA3 Folding Machine; Lot 4: 92 mm Guillotine, 60-65 cm Guillotine; and Lot 5: B2 Pile Turner. View the procurement »
The Houses of the Oireachtas Commission invites tenders for the supply, installation and maintenance of Printing Equipment for the Houses of the Oireachtas Print Facility. This RFT will be divided into 5 Lots as follows: Lot 1: B2 Plate Making Device; Lot 2: 4 Colour Printing Press; Lot 3: B2 Folding Machine, SRA3 Folding Machine; Lot 4: 92 mm Guillotine, 60-65 cm Guillotine; and Lot 5: B2 Pile Turner. View the procurement »
2018-01-19
LEE409C — RFT for the Supply of Colloidal Jetting-Based Metal Additive Manufacturing & Powder Bed-Based Metal... (Education Procurement Service (EPS))
University College Dublin requests for tenders for the supply 2 lots. Lot 1: Colloidal Jetting-Based Metal Additive Manufacturing Machine capable of depositing a variety of metal colloids, including, but not limited to: silver, polymers and biological solutions. This instrument will be used in an R&D setting in order to fabricate printed electronic circuits on substrates and Lot 2 a Powder Bed-Based Metal Selective Laser Melting (SLM) Machine capable of sintering a variety of metal powders, including, … View the procurement »
University College Dublin requests for tenders for the supply 2 lots. Lot 1: Colloidal Jetting-Based Metal Additive Manufacturing Machine capable of depositing a variety of metal colloids, including, but not limited to: silver, polymers and biological solutions. This instrument will be used in an R&D setting in order to fabricate printed electronic circuits on substrates and Lot 2 a Powder Bed-Based Metal Selective Laser Melting (SLM) Machine capable of sintering a variety of metal powders, including, … View the procurement »
2017-08-28
Request-for-Tenders for the Supply of an Additive/Subtractive Manufacturing Testbed for electrically, optically and... (Education Procurement Service (EPS))
Tenders are sought for the supply and installation of Additive/subtractive manufacturing testbed for electrically, optically and thermally — activated biomaterials. The system will consist of three connected modules. A laser micro-structuring module will create structured surfaces for microfluidics and embedded electronics. A materials additive module will use ink-jet and spray tools to create structured conductive/ non-conductive surfaces. A bioprinting module will apply living cells and other … View the procurement »
Tenders are sought for the supply and installation of Additive/subtractive manufacturing testbed for electrically, optically and thermally — activated biomaterials. The system will consist of three connected modules. A laser micro-structuring module will create structured surfaces for microfluidics and embedded electronics. A materials additive module will use ink-jet and spray tools to create structured conductive/ non-conductive surfaces. A bioprinting module will apply living cells and other … View the procurement »
2017-05-19
RFT for the Supply of Nanophotolithography Equipment Pharmaceutical and Molecular Biotechnology Research Centre,... (Education Procurement Service (EPS))
PMBRC (Pharmaceutical and Molecular Biotechnology Research Centre) is an applied research centre which aims to support the sustainable growth of the pharmaceutical and healthcare industry in the south east of Ireland. Situated in the heart of the region on the WIT campus, the centre seeks to stimulate research and innovation, allowing companies to embed R&D into their activities. An emerging area of research is development of multiplexed sensor technologies based on plasmonic nanostructures. This tender … View the procurement »
PMBRC (Pharmaceutical and Molecular Biotechnology Research Centre) is an applied research centre which aims to support the sustainable growth of the pharmaceutical and healthcare industry in the south east of Ireland. Situated in the heart of the region on the WIT campus, the centre seeks to stimulate research and innovation, allowing companies to embed R&D into their activities. An emerging area of research is development of multiplexed sensor technologies based on plasmonic nanostructures. This tender … View the procurement »
2017-05-19
RFT for the Supply of 3D Electronics Printing Equipment for the Pharmaceutical and Molecular Biotechnology Research... (Education Procurement Service (EPS))
PMBRC (Pharmaceutical and Molecular Biotechnology Research Centre) is an applied research centre which aims to support the sustainable growth of the pharmaceutical and healthcare industry in the south east of Ireland. Situated in the heart of the region on the WIT campus, the centre seeks to stimulate research and innovation, allowing companies to embed R&D into their activities. Due to increased R&D activity relating to the development of sensor technologies for biomedical applications, the PMBRC has … View the procurement »
PMBRC (Pharmaceutical and Molecular Biotechnology Research Centre) is an applied research centre which aims to support the sustainable growth of the pharmaceutical and healthcare industry in the south east of Ireland. Situated in the heart of the region on the WIT campus, the centre seeks to stimulate research and innovation, allowing companies to embed R&D into their activities. Due to increased R&D activity relating to the development of sensor technologies for biomedical applications, the PMBRC has … View the procurement »
2017-01-03
RFT for the supply of Print Consumables for the Houses of the Oireachtas Print Facility (Houses of the Oireachtas Service)
Lot 1: Prepress Consumables which is for all items to enable the unit, expose and develop polyester plate rolls on the Eskofot DPX CTP system. Lot 2: Pressroom Consumables which is for all items to enable the unit print using Heidelberg printing presses Lot 3: Auxiliary Consumables covers all non-print related items that are needed to run the unit. View the procurement »
Lot 1: Prepress Consumables which is for all items to enable the unit, expose and develop polyester plate rolls on the Eskofot DPX CTP system. Lot 2: Pressroom Consumables which is for all items to enable the unit print using Heidelberg printing presses Lot 3: Auxiliary Consumables covers all non-print related items that are needed to run the unit. View the procurement »
2016-12-16
Supply of Smart Card/Tickets (Dublin Bus / Bus Atha Cliath)
Dublin Bus intends to award a contract for the supply of smart cards for public transport ticketing. The cards that will be procured under this contract will be low cost, disposable (i.e. not intended to be used for reloading) cards. Dublin Bus is currently using cards with the MF0 IC U1 chip, manufactured by NXP, (commonly known as Mifare Ultralight). The cards will be fully electronically and graphically prepersonalised by the card supplier. Cards will be sold to customers without further modification … View the procurement »
Dublin Bus intends to award a contract for the supply of smart cards for public transport ticketing. The cards that will be procured under this contract will be low cost, disposable (i.e. not intended to be used for reloading) cards. Dublin Bus is currently using cards with the MF0 IC U1 chip, manufactured by NXP, (commonly known as Mifare Ultralight). The cards will be fully electronically and graphically prepersonalised by the card supplier. Cards will be sold to customers without further modification … View the procurement »
2016-11-03
Request for Tenders for the supply and installation of open system Metal Additive Manufacturing equipment, X-ray Non... (Education Procurement Service (EPS))
This public procurement competition (the “Competition) will be divided into four (4) lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Product Description QTY Tendering (Y/N). LOT 1: High Resolution Metal Selective Laser Melting platform. Lot 2: Moderate Resolution Metal Selective Laser Melting platform. Lot 3: Micro CT platform. Lot 4: Lab Research Polymer Twin-Screw Extruder platform. View the procurement »
This public procurement competition (the “Competition) will be divided into four (4) lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Product Description QTY Tendering (Y/N). LOT 1: High Resolution Metal Selective Laser Melting platform. Lot 2: Moderate Resolution Metal Selective Laser Melting platform. Lot 3: Micro CT platform. Lot 4: Lab Research Polymer Twin-Screw Extruder platform. View the procurement »