Procurements: Lasers
One active procurement
Lasers have been procured by organizations such as Education Procurement Service (EPS), St James's Hospital, and Carrick-on-Shannon Community School.
Historically, suppliers within this area have been Ronayne Hire & Hardware, SG Education, 3D Technology Ltd, Aconity3D GmbH, Acutance Scientific Ltd, Amiston Limited, Antech Solutions Ltd., Central Technology Supplies, Central Technology Supplies.ie, and Coherent Uk Ltd.
- Laboratory, optical and precision equipments (excl. glasses) (>20 new procurements)
- Optical instruments (3)
- Astronomical and optical instruments (1)
- Specialist optical instruments (1)
- Lasers (1) ⬅️
Recent procurements of lasers in Ireland
2026-04-28
Deadline 2026-05-19
Call for Tender for the supply and installation of T4 subjects to St. Colman's College Claremorris, 64610N (St. Colman's College (Claremorris))
The Board of Management of St Colman’s College (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). Lot 1 - Construction Studies/Wood Technology Lot 2 - Wood Machining and Preparation Lot 3 - Engineering Lot 4 - Design and Communication Graphics (DCG) Lot 5 - Graphics Design Lab Lot 6 - Electronics (Not mandatory!) View the procurement »
The Board of Management of St Colman’s College (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). Lot 1 - Construction Studies/Wood Technology Lot 2 - Wood Machining and Preparation Lot 3 - Engineering Lot 4 - Design and Communication Graphics (DCG) Lot 5 - Graphics Design Lab Lot 6 - Electronics (Not mandatory!) View the procurement »
2026-02-04
LA3532C -RFT for the Supply, Delivery, Installation, Commissioning and Validation of an Ultra-Narrow Linewidth... (Education Procurement Service (EPS))
The Tyndall National Institute wishes to purchase an Ultra-Narrow linewidth Broadly tuneable Titanium (Ti): Sapphire Continuous Wave Laser. A fully automated hands-free/turnkey Ultra-Narrow linewidth Broadly tuneable Ti: Sapphire Continuous Wave laser (range with no optics change at least ~700-940 nm) as source for the Qlibri closed loop cavity system. The tuneable laser system should deliver power equal or exceeding 0.7 W (as measured at 780 nm) to excite a variety of nanostructures embedded in the … View the procurement »
The Tyndall National Institute wishes to purchase an Ultra-Narrow linewidth Broadly tuneable Titanium (Ti): Sapphire Continuous Wave Laser. A fully automated hands-free/turnkey Ultra-Narrow linewidth Broadly tuneable Ti: Sapphire Continuous Wave laser (range with no optics change at least ~700-940 nm) as source for the Qlibri closed loop cavity system. The tuneable laser system should deliver power equal or exceeding 0.7 W (as measured at 780 nm) to excite a variety of nanostructures embedded in the … View the procurement »
2026-01-13
Request for Tenders for the Supply, Delivery and Installation of a Laser Capital Machine (Irish Manufacturing Research CLG)
Tenders are sought for the supply, delivery and installation of a 5 axis laser CNC machine to be used in a research and development capacity in the area of product and component production, surface texturing and micromachining. View the procurement »
Tenders are sought for the supply, delivery and installation of a 5 axis laser CNC machine to be used in a research and development capacity in the area of product and component production, surface texturing and micromachining. View the procurement »
2026-01-08
Call for Tenders for the supply, delivery, installation and maintenance of tools and equipment for T4 subjects to... (St. Louis Secondary School (Monaghan))
This public procurement competition will be divided into [3] Lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided in the specification and descriptions documents accompanying this CFT document and must provide the relevant price in the Excel pricing worksheet also. An incomplete Lot will not be considered. Lot 1 - Applied Technology/Technology Lot 2 - Design and … View the procurement »
This public procurement competition will be divided into [3] Lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided in the specification and descriptions documents accompanying this CFT document and must provide the relevant price in the Excel pricing worksheet also. An incomplete Lot will not be considered. Lot 1 - Applied Technology/Technology Lot 2 - Design and … View the procurement »
2026-01-02
Call for Tenders for the supply and installation of T4 Subjects (Construction and Wood Tech, Graphics Design, Wood... (Meanscoil Iognaid Ris (Naas CBS))
The Board of Management of Meánscoil Iognáid RĂs (Naas CBS) (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). In summary, the Goods comprise: Tools and Equipment for the teaching of Construction Studies/Wood Technology, Graphics, and Machinery/Preparation based, mostly on specifications by the Department of Education and Youth (DEY) for … View the procurement »
The Board of Management of Meánscoil Iognáid RĂs (Naas CBS) (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). In summary, the Goods comprise: Tools and Equipment for the teaching of Construction Studies/Wood Technology, Graphics, and Machinery/Preparation based, mostly on specifications by the Department of Education and Youth (DEY) for … View the procurement »
2025-11-07
Call for Tenders for the supply and installation of T4 Subjects (Construction and Wood Tech, Graphics Design, Wood... (Meanscoil Iognaid Ris (Naas CBS))
The Board of Management of Meánscoil Iognáid RĂs (Naas CBS) (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 15th January 2026. In summary, the Goods comprise: Tools and Equipment for the teaching of Construction Studies/Wood Technology, Graphics, and Machinery/Preparation based, … View the procurement »
The Board of Management of Meánscoil Iognáid RĂs (Naas CBS) (the “Contracting Authority”) invites tenders (“Tenders”) to this Call for Tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed on or before 15th January 2026. In summary, the Goods comprise: Tools and Equipment for the teaching of Construction Studies/Wood Technology, Graphics, and Machinery/Preparation based, … View the procurement »
2025-11-05
Call for Tenders dated 05/11/2025 for the supply, delivery, installation and maintenance of tools and equipment for... (St. Brendan's Community School (Birr))
St. Brendan’s Community School, Birr is seeking proposals for the supply, delivery, installation and maintenance of sustainable (where possible) tools and equipment for the teaching of Engineering. It is intended to award a contract to a single supplier. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided. An incomplete Lot will not be considered unless the tender says otherwise. View the procurement »
St. Brendan’s Community School, Birr is seeking proposals for the supply, delivery, installation and maintenance of sustainable (where possible) tools and equipment for the teaching of Engineering. It is intended to award a contract to a single supplier. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided. An incomplete Lot will not be considered unless the tender says otherwise. View the procurement »
2025-08-19
HSE 27543 National Contract for Lithotripor with C-Arm (Health Service Executive (HSE))
The Health Service Executive (the “HSE”) is tasked with sourcing Health related goods and services on behalf of the public service. References to the Contracting Authority will be deemed to include the HSE. This Open Competition will be coÂordinated and managed by the HSE. See tender documents regarding Lots View the procurement »
The Health Service Executive (the “HSE”) is tasked with sourcing Health related goods and services on behalf of the public service. References to the Contracting Authority will be deemed to include the HSE. This Open Competition will be coÂordinated and managed by the HSE. See tender documents regarding Lots View the procurement »
2025-06-24
Call for Tenders dated 24 June 2025 for the supply, delivery, installation and maintenance of tools and equipment... (Bailieborough Community School)
1.1 Overview of the School Bailieborough Community School is a co-education secondary school located in the east of Cavan under the trusteeship of Kilmore Diocese and Cavan Monaghan ETB. There are 754 students as of July 2025. 1.2 Overview of the Requirements Bailieborough Community School is seeking proposals for the supply, delivery, installation and maintenance of sustainable (where possible) tools and equipment for the teaching of T4 Subjects. It is intended to award a contract to a single supplier … View the procurement »
1.1 Overview of the School Bailieborough Community School is a co-education secondary school located in the east of Cavan under the trusteeship of Kilmore Diocese and Cavan Monaghan ETB. There are 754 students as of July 2025. 1.2 Overview of the Requirements Bailieborough Community School is seeking proposals for the supply, delivery, installation and maintenance of sustainable (where possible) tools and equipment for the teaching of T4 Subjects. It is intended to award a contract to a single supplier … View the procurement »
2025-05-29
LA3285C UCD - RFT for the Supply, Delivery, Installation and Commissioning of a Femtosecond Laser (Education Procurement Service (EPS))
Tenders are sought for the Supply, Delivery, Installation and Commissioning of a Femtosecond-Laser for University College Dublin. Specifically, this should emit pulses with shortest duration no longer than 250 fs, at a wavelength of ~1030 nm and a maximum repetition rate no less than 1000 Hz, for a maximum output power of 20 W. MNMT-Dublin requires this piece of equipment for applications such as laser nanotexturing and harmonic generation. Integration of the device with other equipment and/or optical … View the procurement »
Tenders are sought for the Supply, Delivery, Installation and Commissioning of a Femtosecond-Laser for University College Dublin. Specifically, this should emit pulses with shortest duration no longer than 250 fs, at a wavelength of ~1030 nm and a maximum repetition rate no less than 1000 Hz, for a maximum output power of 20 W. MNMT-Dublin requires this piece of equipment for applications such as laser nanotexturing and harmonic generation. Integration of the device with other equipment and/or optical … View the procurement »
2025-02-19
Call for Tenders dated 19th February 2025 for the supply, delivery, installation and maintenance of tools and... (St Finian's College Mullingar)
Proposals from Tenderers are being sought to supply, deliver, installation and maintenance of sustainable (where possible) T4 Tools and Equipment for St Finian’s College. It is intended to award a contract to a single service provider for each Lot of this competition. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided. An incomplete Lot will not be considered, unless the tender says otherwise. The School requires a high quality, flexible and … View the procurement »
Proposals from Tenderers are being sought to supply, deliver, installation and maintenance of sustainable (where possible) T4 Tools and Equipment for St Finian’s College. It is intended to award a contract to a single service provider for each Lot of this competition. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided. An incomplete Lot will not be considered, unless the tender says otherwise. The School requires a high quality, flexible and … View the procurement »
2024-08-28
LA2876C DCU RFT for the Supply, Installation and Commissioning of an FTIR Microscope and a Gas Chromatography Mass... (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery, installation and commissioning of a benchtop FTIR Microscope with Automated stage and MCT Detector (LN2) for high performance in IR microscopy to analyse individually defined sampling positions, as well as larger sample areas with high spatial resolution in transmission, attenuated total reflection (ATR), and reflection modes. Tenders must also provide information on the FTIR microscope's suitability for the analysis of microfossils. Any measurement procedure … View the procurement »
Tenders are sought for the supply, delivery, installation and commissioning of a benchtop FTIR Microscope with Automated stage and MCT Detector (LN2) for high performance in IR microscopy to analyse individually defined sampling positions, as well as larger sample areas with high spatial resolution in transmission, attenuated total reflection (ATR), and reflection modes. Tenders must also provide information on the FTIR microscope's suitability for the analysis of microfossils. Any measurement procedure … View the procurement »
2024-06-24
LA2926C-DCU-RFT for the Supply of a Flow Cytometry Analyser (Education Procurement Service (EPS))
Dublin City University request the supply of a Flow Cytometry Analyser with four (4) lasers and sixteen (16) detection channels. It would be preferable for the analyser to be based on photodiode (PD) photon detectors rather than photomultiplier tubes (PMT) for higher sensitivity, linearity and consistency which reduces variability during longitudinal studies. View the procurement »
Dublin City University request the supply of a Flow Cytometry Analyser with four (4) lasers and sixteen (16) detection channels. It would be preferable for the analyser to be based on photodiode (PD) photon detectors rather than photomultiplier tubes (PMT) for higher sensitivity, linearity and consistency which reduces variability during longitudinal studies. View the procurement »
2024-04-05
Provision of a High Power Holmium Surgical Laser for St James's Hospital (St James's Hospital)
The CA is tendering for a high power holmium surgical laser for use in urology procedures. Its intended use is for the following procedures (non-exhaustive list): lithotripsy procedures, upper tract transitional cell carcinoma treatment, laser prostate surgery. The high power laser unit must have a maximum power output of no less than 100W. View the procurement »
The CA is tendering for a high power holmium surgical laser for use in urology procedures. Its intended use is for the following procedures (non-exhaustive list): lithotripsy procedures, upper tract transitional cell carcinoma treatment, laser prostate surgery. The high power laser unit must have a maximum power output of no less than 100W. View the procurement »
2024-03-28
LA2797C-UL- RFT for the Supply of a Single Tape Winding Automatic Placement (ATP) Head and Control Operating Software (Education Procurement Service (EPS))
Tenders are invited for the supply, delivery and installation of a Single Tape Winding Automatic Placement (ATP) Head and Control Operating Software for the School of Engineering, University of Limerick. The supplied single tape winding head and ancillaries will be an upgrade to our current winding head and will allow the University to advance its thermoplastic manufacturing capabilities with the latest leading-edge technology. The unit will advance UL’s capabilities and future thermoplastic research. It … View the procurement »
Tenders are invited for the supply, delivery and installation of a Single Tape Winding Automatic Placement (ATP) Head and Control Operating Software for the School of Engineering, University of Limerick. The supplied single tape winding head and ancillaries will be an upgrade to our current winding head and will allow the University to advance its thermoplastic manufacturing capabilities with the latest leading-edge technology. The unit will advance UL’s capabilities and future thermoplastic research. It … View the procurement »
2024-01-11
LA2758C- University of Galway- RFT for a Femtosecond Laser Materials Processing System [2 Lots] (Education Procurement Service (EPS))
University of Galway request the supply of a Femtosecond Laser Materials Processing System to support ongoing and future industrial projects at the National Centre for Laser Applications (NCLA) in the University of Galway. The system consists of an advanced Femtosecond laser source, beam shaping and delivery system, galvo scanners and multi-axis motion stages. This tender consists of 2 lots, tenderers can submit proposal for multiple or individual lots. Lot 1 Femtosecond Laser, Qty X 1 Lot 2 Multi-Axis … View the procurement »
University of Galway request the supply of a Femtosecond Laser Materials Processing System to support ongoing and future industrial projects at the National Centre for Laser Applications (NCLA) in the University of Galway. The system consists of an advanced Femtosecond laser source, beam shaping and delivery system, galvo scanners and multi-axis motion stages. This tender consists of 2 lots, tenderers can submit proposal for multiple or individual lots. Lot 1 Femtosecond Laser, Qty X 1 Lot 2 Multi-Axis … View the procurement »
2023-12-08
Call for Tenders for the supply, delivery, installation and maintenance of tools and equipment for the T4 subjects (Belmayne ETSS)
The Board of Management of Belmayne ETSS, (the “Contracting Authority”) invites tenders (“Tenders”) to this call for tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed in Belmayne ETSS on or before the end of March 2024. In summary, the Goods comprise: Machinery and Equipment for the T4 subjects, based, mostly on specifications by the Department of Education (DE) for … View the procurement »
The Board of Management of Belmayne ETSS, (the “Contracting Authority”) invites tenders (“Tenders”) to this call for tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed in Belmayne ETSS on or before the end of March 2024. In summary, the Goods comprise: Machinery and Equipment for the T4 subjects, based, mostly on specifications by the Department of Education (DE) for … View the procurement »
2023-10-27
Call for Tenders for the supply delivery and installation of Tools, Machinery and Equipment for the teaching of T4... (Colaiste Chiarain Leixlip)
The Board of Management of Colaiste Chiarain, Leixlip, (the “Contracting Authority”) invites tenders (“Tenders”) to this call for tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed in Colaiste Chiarain on or before the end of February 2024, or as otherwise agreed. In summary, the Goods comprise Tools, Machinery and Equipment, based mostly on specifications by the … View the procurement »
The Board of Management of Colaiste Chiarain, Leixlip, (the “Contracting Authority”) invites tenders (“Tenders”) to this call for tenders (“CFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this CFT (the “Goods”). The Goods are required to be supplied and installed in Colaiste Chiarain on or before the end of February 2024, or as otherwise agreed. In summary, the Goods comprise Tools, Machinery and Equipment, based mostly on specifications by the … View the procurement »
2023-09-12
LA2625C UCC RFT for the Supply of a Microscope-based Laser Doppler Vibrometer (Education Procurement Service EPS)
Tenders are sought for the supply, delivery, installation, and commissioning of a Microscope based Laser Doppler Vibrometer (LDV). The scope of this tender is to purchase a Microscope-based Laser Doppler Vibrometer capable of non-contact vibration measurement of MEMS (micro-electro-mechanical systems) devices with vibrational resonances ranging from near-DC to 2.5 GHz. To also include all necessary training and warranties. The Microscope-based Laser Doppler Vibrometer (LDV) must fulfil the minimum … View the procurement »
Tenders are sought for the supply, delivery, installation, and commissioning of a Microscope based Laser Doppler Vibrometer (LDV). The scope of this tender is to purchase a Microscope-based Laser Doppler Vibrometer capable of non-contact vibration measurement of MEMS (micro-electro-mechanical systems) devices with vibrational resonances ranging from near-DC to 2.5 GHz. To also include all necessary training and warranties. The Microscope-based Laser Doppler Vibrometer (LDV) must fulfil the minimum … View the procurement »
2023-07-19
Tender for the Supply, Delivery, Installation, Commissioning and Maintenance of (Polymer) Selective Laser Sintering... (Munster Technological University.)
Munster Technological University [MTU] is seeking tenders for the supply, installation and commissioning of a new Selective Laser Sintering (SLS) machine and large format Stereolithography (SLA) machine for use in teaching and learning in an educational environment by multiple users. The equipment required under this tender will be used for teaching and learning in an educational environment by multiple users. The equipment is required, where practicable, for courses which commence in Semester 2 … View the procurement »
Munster Technological University [MTU] is seeking tenders for the supply, installation and commissioning of a new Selective Laser Sintering (SLS) machine and large format Stereolithography (SLA) machine for use in teaching and learning in an educational environment by multiple users. The equipment required under this tender will be used for teaching and learning in an educational environment by multiple users. The equipment is required, where practicable, for courses which commence in Semester 2 … View the procurement »
2023-07-14
Call for Tenders for the supply, delivery, installation and maintenance of Construction, Wood Technology and... (Patrician Academy)
The Board of Management of Patrician Academy "the Contracting Authority" invites tenders "Tenders" to this call for tenders "CFT" from economic operators "Tenderers" for the supply of the goods as described in Appendix 1 to this CFT "the Goods". The Goods are required to be supplied and installed in Patrician Academy on or before the end of October 2023. In summary, the Goods comprise: Construction Studies, Wood Technology and Preparation, Graphics Design Lab, DCG tools and equipment Machinery and … View the procurement »
The Board of Management of Patrician Academy "the Contracting Authority" invites tenders "Tenders" to this call for tenders "CFT" from economic operators "Tenderers" for the supply of the goods as described in Appendix 1 to this CFT "the Goods". The Goods are required to be supplied and installed in Patrician Academy on or before the end of October 2023. In summary, the Goods comprise: Construction Studies, Wood Technology and Preparation, Graphics Design Lab, DCG tools and equipment Machinery and … View the procurement »
2023-05-26
Call for Tenders for the supply, delivery, installation and maintenance of Construction Studies, Wood Machining and... (Carrick-on-Shannon Community School)
The Board of Management of Carrick on Shannon Community School, (the Contracting Authority) invites tenders to this call for tenders CFT from economic operators (Tenderers) for the supply of the goods as described in Appendix 1 to this CFT (the Goods). The Goods are required to be supplied and installed in Carrick on Shannon Community School on or before the end of September 2023 In summary, the Goods comprise Engineering Machinery and Equipment, based, mostly on specifications by the Department of … View the procurement »
The Board of Management of Carrick on Shannon Community School, (the Contracting Authority) invites tenders to this call for tenders CFT from economic operators (Tenderers) for the supply of the goods as described in Appendix 1 to this CFT (the Goods). The Goods are required to be supplied and installed in Carrick on Shannon Community School on or before the end of September 2023 In summary, the Goods comprise Engineering Machinery and Equipment, based, mostly on specifications by the Department of … View the procurement »
2023-02-13
Supply, Delivery and Installation of Construction Studies and Wood Machining and Preparation Tools Equipment in 3 Lots (Kerry Education and Training Board)
Supply, Delivery and Installation of Construction Studies and Wood Machining and Preparation Tools Equipment in 3 Lots for Kerry Education and Training Board View the procurement »
Supply, Delivery and Installation of Construction Studies and Wood Machining and Preparation Tools Equipment in 3 Lots for Kerry Education and Training Board View the procurement »
2023-02-09
LA2428C-Technological University Dublin-RFT for the Supply of a Multimodal Imaging Platform (Education Procurement Service (EPS))
The Multimodal Imaging Platform is required for the visualisation and analysis of materials and physical, chemical and biological processes at a scale of hundreds of nanometers. It is envisaged that the Platform should combine the modalities of state-of-the-art visible confocal fluorescence microscopy with imaging based on fluorescence lifetime, 2 photon fluorescence, second harmonic generation (SHG), coherent anti-Stokes (CARS), and stimulated Raman scattering (SRS). The source must be minimally … View the procurement »
The Multimodal Imaging Platform is required for the visualisation and analysis of materials and physical, chemical and biological processes at a scale of hundreds of nanometers. It is envisaged that the Platform should combine the modalities of state-of-the-art visible confocal fluorescence microscopy with imaging based on fluorescence lifetime, 2 photon fluorescence, second harmonic generation (SHG), coherent anti-Stokes (CARS), and stimulated Raman scattering (SRS). The source must be minimally … View the procurement »
2022-12-19
Request for Tenders for the supply, delivery, installation and maintenance of equipment for Tools, Equipment and... (Carrick-on-Shannon Community School)
The Board of Management of Carrick on Shannon Community School, (the “Contracting Authority”) invites tenders (“Tenders”) to this request for tenders (“RFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this RFT (the “Goods”). The Goods are required to be supplied and installed in Carrick on Shannon Community School on or before the end of March 2023. In summary, the Goods comprise: General Tools & Equipment for engineering machinery and tools and … View the procurement »
The Board of Management of Carrick on Shannon Community School, (the “Contracting Authority”) invites tenders (“Tenders”) to this request for tenders (“RFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this RFT (the “Goods”). The Goods are required to be supplied and installed in Carrick on Shannon Community School on or before the end of March 2023. In summary, the Goods comprise: General Tools & Equipment for engineering machinery and tools and … View the procurement »
2022-12-14
The Provision of School Classroom Equipment including Multi-Sensory Equipment for Post Primary Schools under KWETB (Kildare and Wicklow Education and Training Board)
KWETB invites suitably qualified economic operators for the provision of School Classroom Equipment including Multi-Sensory Equipment for their Post Primary Schools. There are 25 LOTS in total. A single supplier framework will be established for EACH LOT and tenderers may submit for more than one LOT. Individual contracts will be awarded PER LOT. View the procurement »
KWETB invites suitably qualified economic operators for the provision of School Classroom Equipment including Multi-Sensory Equipment for their Post Primary Schools. There are 25 LOTS in total. A single supplier framework will be established for EACH LOT and tenderers may submit for more than one LOT. Individual contracts will be awarded PER LOT. View the procurement »
2022-11-22
Request for Tenders for the supply, delivery, installation & maintenance of Applied Tech, Construction Studies,... (Scoil Mhuire Gan Smal (Blarney))
The Board of Management of Scoil Mhuire Gan Smal, (the “Contracting Authority”) invites tenders (“Tenders”) to this request for tenders (“RFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this RFT (the “Goods”). The Goods are required to be supplied and installed in Scoil Mhuire Gan Smal on or before the end of 31st March 2023. In summary, the Goods comprise: Applied Technology, Construction Studies, Engineering, Graphic Design Lab, Design Communication … View the procurement »
The Board of Management of Scoil Mhuire Gan Smal, (the “Contracting Authority”) invites tenders (“Tenders”) to this request for tenders (“RFT”) from economic operators (“Tenderers”) for the supply of the goods as described in Appendix 1 to this RFT (the “Goods”). The Goods are required to be supplied and installed in Scoil Mhuire Gan Smal on or before the end of 31st March 2023. In summary, the Goods comprise: Applied Technology, Construction Studies, Engineering, Graphic Design Lab, Design Communication … View the procurement »
2022-07-08
LA2096C TUD RFT Provision of a Quantum-Cascade Laser Fourier Transform Infrared imaging microscope system (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery, installation and calibration of a Quantum-Cascade Laser Fourier Transform Infrared imaging microscope system. The Quantum-cascade laser Fourier Transform Infrared imaging microscope (QCL-FTIR) System is intended for use in histopathological analysis and associated applications. The device will be used by a range of senior and junior scientists under the supervision of Dr. Aidan D. Meade and will also be made available for commercial and industrial use by … View the procurement »
Tenders are sought for the supply, delivery, installation and calibration of a Quantum-Cascade Laser Fourier Transform Infrared imaging microscope system. The Quantum-cascade laser Fourier Transform Infrared imaging microscope (QCL-FTIR) System is intended for use in histopathological analysis and associated applications. The device will be used by a range of senior and junior scientists under the supervision of Dr. Aidan D. Meade and will also be made available for commercial and industrial use by … View the procurement »
2022-07-07
SETU RFT Provision of a Nanoscale Chemical Imaging System (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery, installation and calibration of a Nanoscale Chemical Imaging System. The Nanoscale Chemical Imaging System will be used to provide correlative imaging of the nanochemical and nanophysical properties of materials, with applications in therapeutics, diagnostics, medical devices, sensing and energy. View the procurement »
Tenders are sought for the supply, delivery, installation and calibration of a Nanoscale Chemical Imaging System. The Nanoscale Chemical Imaging System will be used to provide correlative imaging of the nanochemical and nanophysical properties of materials, with applications in therapeutics, diagnostics, medical devices, sensing and energy. View the procurement »
2022-06-24
LA2033C UL RFT Provision: Laboratory equipment for Analysis & Flow characterisation (4 Lots) (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery & installation of Laboratory equipment for the analysis of nano (bio) Pharmaceuticals. Lot 1 Laser diffraction particle size analyser Lot 2 Laser and Phase Doppler Anemometer Lot 3 Endoscopic imaging probes Lot 4 High-speed camera View the procurement »
Tenders are sought for the supply, delivery & installation of Laboratory equipment for the analysis of nano (bio) Pharmaceuticals. Lot 1 Laser diffraction particle size analyser Lot 2 Laser and Phase Doppler Anemometer Lot 3 Endoscopic imaging probes Lot 4 High-speed camera View the procurement »
2022-06-03
Establishment of 29 Framework Agreements for Classroom Equipment (Cork Education and Training Board)
Cork Education and Training Board invites tenders in relation to the establishment of 29 separate framework agreements covering equipment defined by the Department of Education as follows: Category 1 – Construction Studies/Wood Technology Equipment CS/A and CS/B - a total of 15 lots; Category 2 – Engineering Equipment ENG/A and ENG/B - a total of 13 lots; and Category 3 – Wood Machining and Preparation Room Equipment WMP - 1 lot. Tenderers can apply for one or all lots. The framework will be established … View the procurement »
Cork Education and Training Board invites tenders in relation to the establishment of 29 separate framework agreements covering equipment defined by the Department of Education as follows: Category 1 – Construction Studies/Wood Technology Equipment CS/A and CS/B - a total of 15 lots; Category 2 – Engineering Equipment ENG/A and ENG/B - a total of 13 lots; and Category 3 – Wood Machining and Preparation Room Equipment WMP - 1 lot. Tenderers can apply for one or all lots. The framework will be established … View the procurement »
2022-04-14
Supply, Delivery, Installation, Commissioning and Calibration of a Multimodal In-Situ Raman System to the University... (Education Procurement Service (EPS))
University of Limericks, PMTC, request the supply of a multimodal Hybrid PAT Raman system equipped with multiple optical probes for inline application in both Pharmaceutical and Biopharmaceutical sectors designed with industrial standards. The system must offer the possibility to work in air or in an immersion environment like bioreactors. The system must be designed for lab-to-process optimization, scalability, quality, and safety. The system must operate continuously for 24h/7 with process feedback for … View the procurement »
University of Limericks, PMTC, request the supply of a multimodal Hybrid PAT Raman system equipped with multiple optical probes for inline application in both Pharmaceutical and Biopharmaceutical sectors designed with industrial standards. The system must offer the possibility to work in air or in an immersion environment like bioreactors. The system must be designed for lab-to-process optimization, scalability, quality, and safety. The system must operate continuously for 24h/7 with process feedback for … View the procurement »
2022-03-25
Supply of Fiber Laser Cutter (Enda Keenan Stainless Steel Fabrications Ltd)
Cantilever Based High Performance Fiber 4KW Laser Working area L 4500mm x W 3000mm x H 2600mm Cutting Area - 1525mm x 3050mm x 900mm Helical Rack & Pinion Drive System Capable of cutting 20mm mild steel, 15mm Stainless Steel, 15mm Aluminium CNC Controller with VDU and Camera Interface Tender to include installation, training & Commissioning View the procurement »
Cantilever Based High Performance Fiber 4KW Laser Working area L 4500mm x W 3000mm x H 2600mm Cutting Area - 1525mm x 3050mm x 900mm Helical Rack & Pinion Drive System Capable of cutting 20mm mild steel, 15mm Stainless Steel, 15mm Aluminium CNC Controller with VDU and Camera Interface Tender to include installation, training & Commissioning View the procurement »
2022-03-24
Request for tender for supply of Scientific Laboratory Equipment to Institute of Technology Sligo (ITSLIGO)
The Institute of Technology Sligo requests tenders for the supply of Scientific Laboratory Equipment for teaching, learning, and research purposes for their undergraduate and postgraduate programmes delivered by the Faculty of Science. Please see hereunder a summary of type and category of goods required. Full details are available in the published tender documents. Materials Science Equipment Clinical Measurement Physiology Equipment Analytical Instruments Life Sciences Equipment Environmental … View the procurement »
The Institute of Technology Sligo requests tenders for the supply of Scientific Laboratory Equipment for teaching, learning, and research purposes for their undergraduate and postgraduate programmes delivered by the Faculty of Science. Please see hereunder a summary of type and category of goods required. Full details are available in the published tender documents. Materials Science Equipment Clinical Measurement Physiology Equipment Analytical Instruments Life Sciences Equipment Environmental … View the procurement »
2021-08-04
LGH1559C - TCD - Provision of a Cavity Ring-Down Spectroscopy (CRDS) system (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery, on-site installation and maintenance of a modular isotopic Cavity Ring-down Spectroscopy (CRDS) system suited for lab and field deployment which must provide accurate, replicable and simultaneous measurements of δ13C in CO2 and CH4, δ15N δ15Nα, δ15Nβ, δ18O in N2O, and δ18O, δD in H2O. The tender proposal should highlight features and specifications that contribute to maximising the available research budget. The instruments are to be supplied and installed … View the procurement »
Tenders are sought for the supply, delivery, on-site installation and maintenance of a modular isotopic Cavity Ring-down Spectroscopy (CRDS) system suited for lab and field deployment which must provide accurate, replicable and simultaneous measurements of δ13C in CO2 and CH4, δ15N δ15Nα, δ15Nβ, δ18O in N2O, and δ18O, δD in H2O. The tender proposal should highlight features and specifications that contribute to maximising the available research budget. The instruments are to be supplied and installed … View the procurement »
2021-06-24
TCD Multi Supplier Framework Agreement for the Provision of Laser Optics, Components and Accessories (Education Procurement Service (EPS))
The Education Procurement Service (EPS) on behalf of Trinity College Dublin (TCD) invites responses from economic operators for the for appointment to a multi supplier framework agreement for the provision of laser optics, components and accessories. View the procurement »
The Education Procurement Service (EPS) on behalf of Trinity College Dublin (TCD) invites responses from economic operators for the for appointment to a multi supplier framework agreement for the provision of laser optics, components and accessories. View the procurement »
2021-04-07
LGH1437C — IMR — Supply of a Metal Powder Bed Fusion Machine (Education Procurement Service (EPS))
Tenders are sought for the supply, delivery and installation of a laser based metal powder bed fusion machine to be used in a research and development capacity in the area of product and component production. The equipment must fall under the ISO/ASTM 52900 -15 designation for a powder bed fusion machine in its architecture and operating principle. The tender also seeks required accessories and equipment that enable the safe and efficient operation of said machine. This should be inclusive of operational … View the procurement »
Tenders are sought for the supply, delivery and installation of a laser based metal powder bed fusion machine to be used in a research and development capacity in the area of product and component production. The equipment must fall under the ISO/ASTM 52900 -15 designation for a powder bed fusion machine in its architecture and operating principle. The tender also seeks required accessories and equipment that enable the safe and efficient operation of said machine. This should be inclusive of operational … View the procurement »
2020-11-04
Request for Tenders for the Supply, Delivery, Installation, Removal and Maintenance of Equipment for Construction... (St Mary's C.B.S (Enniscorthy))
Proposals from tenderers are being sought to supply and deliver sustainable (where possible) products, install and remove/re-use and maintain construction studies, wood machining and preparation room and/or engineering and/or technology and drawing equipment and machinery in St Marys CBS, Enniscorthy. It is intended to award a contract to a single service provider for each of the lots, (Lot 1 to Lot 3). Tenderers must be able to supply each item on the specification list as per the lot tendered for as … View the procurement »
Proposals from tenderers are being sought to supply and deliver sustainable (where possible) products, install and remove/re-use and maintain construction studies, wood machining and preparation room and/or engineering and/or technology and drawing equipment and machinery in St Marys CBS, Enniscorthy. It is intended to award a contract to a single service provider for each of the lots, (Lot 1 to Lot 3). Tenderers must be able to supply each item on the specification list as per the lot tendered for as … View the procurement »
2020-06-12
2020/45 RFT for the Supply of CNC Router and Laser Cutter (Louth and Meath Education and Training Board)
LMETB are seeking responses to this RFT for the supply, delivery, installation and commissioning of 4 x laser cutter machines and 4 x CNC routers to the LMETB centre of excellence in advanced manufacturing, Dundalk, Co. Louth. View the procurement »
LMETB are seeking responses to this RFT for the supply, delivery, installation and commissioning of 4 x laser cutter machines and 4 x CNC routers to the LMETB centre of excellence in advanced manufacturing, Dundalk, Co. Louth. View the procurement »
2020-02-28
Provision and Support of an Endovenous Laser Ablation Device, Consumables and Associated Maintenance/Service (St James's Hospital)
Provision and support of an endovenous laser ablation device, consumables and associated maintenance/service. View the procurement »
Provision and support of an endovenous laser ablation device, consumables and associated maintenance/service. View the procurement »
2019-06-25
Invitation to Tender for the Provision and Support of a Multi-mode CO2 Laser with Fractional Mode (St James's Hospital)
See uploaded documents. View the procurement »
See uploaded documents. View the procurement »
2018-04-20
Supply and Installation of a Laser Scanning Confocal Microscope System for NUI Galway (Education Procurement Service (EPS))
Tenders are sought by CMI, NUI Galway for the supply and installation of a laser scanning confocal microscope to be used in imaging applications across a broad range of NUIG’s thematic research programmes. The confocal unit should be attached to a high quality, inverted, research microscope and be capable of high resolution detection and imaging of a broad range of samples, typically encountered by the centre. View the procurement »
Tenders are sought by CMI, NUI Galway for the supply and installation of a laser scanning confocal microscope to be used in imaging applications across a broad range of NUIG’s thematic research programmes. The confocal unit should be attached to a high quality, inverted, research microscope and be capable of high resolution detection and imaging of a broad range of samples, typically encountered by the centre. View the procurement »
2018-01-19
LEE409C — RFT for the Supply of Colloidal Jetting-Based Metal Additive Manufacturing & Powder Bed-Based Metal... (Education Procurement Service (EPS))
University College Dublin requests for tenders for the supply 2 lots. Lot 1: Colloidal Jetting-Based Metal Additive Manufacturing Machine capable of depositing a variety of metal colloids, including, but not limited to: silver, polymers and biological solutions. This instrument will be used in an R&D setting in order to fabricate printed electronic circuits on substrates and Lot 2 a Powder Bed-Based Metal Selective Laser Melting (SLM) Machine capable of sintering a variety of metal powders, including, … View the procurement »
University College Dublin requests for tenders for the supply 2 lots. Lot 1: Colloidal Jetting-Based Metal Additive Manufacturing Machine capable of depositing a variety of metal colloids, including, but not limited to: silver, polymers and biological solutions. This instrument will be used in an R&D setting in order to fabricate printed electronic circuits on substrates and Lot 2 a Powder Bed-Based Metal Selective Laser Melting (SLM) Machine capable of sintering a variety of metal powders, including, … View the procurement »
2017-08-28
The Supply of 2 Optical Photo Mask-Aligner Systems (University College Cork (UCC))
The Process and Product development laboratories at Tyndall National Institute, University College Cork fabricate a wide range of electronic and photonic devices that involves the use of optical lithographic patterning. High quality, high resolution, repeatable lithographic processes are required. Tyndall therefore has an interest in acquiring two optical photo mask-aligner systems for advanced research which will be able to handle a wide variety of materials and substrates of varying shapes and sizes. … View the procurement »
The Process and Product development laboratories at Tyndall National Institute, University College Cork fabricate a wide range of electronic and photonic devices that involves the use of optical lithographic patterning. High quality, high resolution, repeatable lithographic processes are required. Tyndall therefore has an interest in acquiring two optical photo mask-aligner systems for advanced research which will be able to handle a wide variety of materials and substrates of varying shapes and sizes. … View the procurement »
2017-08-18
The Supply of an Electron-Beam Lithography System (University College Cork ( UCC ))
The Supply of an Electron-Beam Lithography System for Tyndall National Institute, University College Cork. View the procurement »
The Supply of an Electron-Beam Lithography System for Tyndall National Institute, University College Cork. View the procurement »
2017-05-15
Electron Beam Metal Evaporator (University College Cork ( UCC ))
As per RFT. View the procurement »
As per RFT. View the procurement »
2017-03-24
Laser Ablation System for the National Centre for Isotope Geochemistry at UCD (Education Procurement Service (EPS))
Tenders are sought for the supply and installation of an Excimer laser ablation system, to be coupled with: (a) An iCAPQ Quadrupole ICPMS and, (b) with a Neptune MC-ICPMS for simultaneous analysis of elemental concentrations and isotope ratios, to be installed at the National Centre for Isotope Geochemistry at UCD, School of Earth Sciences, University College Dublin. The laser ablation system will also be used with either of the mass spectrometers specified above, coupled independently. Funding … View the procurement »
Tenders are sought for the supply and installation of an Excimer laser ablation system, to be coupled with: (a) An iCAPQ Quadrupole ICPMS and, (b) with a Neptune MC-ICPMS for simultaneous analysis of elemental concentrations and isotope ratios, to be installed at the National Centre for Isotope Geochemistry at UCD, School of Earth Sciences, University College Dublin. The laser ablation system will also be used with either of the mass spectrometers specified above, coupled independently. Funding … View the procurement »
2016-11-03
Request for Tenders for the supply and installation of open system Metal Additive Manufacturing equipment, X-ray Non... (Education Procurement Service (EPS))
This public procurement competition (the “Competition) will be divided into four (4) lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Product Description QTY Tendering (Y/N). LOT 1: High Resolution Metal Selective Laser Melting platform. Lot 2: Moderate Resolution Metal Selective Laser Melting platform. Lot 3: Micro CT platform. Lot 4: Lab Research Polymer Twin-Screw Extruder platform. View the procurement »
This public procurement competition (the “Competition) will be divided into four (4) lots (each a “Lot”) as described below. Each Lot will result in a separate contract. Product Description QTY Tendering (Y/N). LOT 1: High Resolution Metal Selective Laser Melting platform. Lot 2: Moderate Resolution Metal Selective Laser Melting platform. Lot 3: Micro CT platform. Lot 4: Lab Research Polymer Twin-Screw Extruder platform. View the procurement »
2016-01-19
2-photon laser lithography system (Dublin City University ( DCU ))
DCU wishes to procure a 2-photon Laser Lithography System, in accordance with the requirement specifications below. 2-photon laser lithography is a 3D laser lithography system, using direct laser writing. This is the only technology enabling the manufacturing of real 3D objects with sub-micrometer precision in 1 process step. View the procurement »
DCU wishes to procure a 2-photon Laser Lithography System, in accordance with the requirement specifications below. 2-photon laser lithography is a 3D laser lithography system, using direct laser writing. This is the only technology enabling the manufacturing of real 3D objects with sub-micrometer precision in 1 process step. View the procurement »
2012-05-24
Delivery, Supply & Installation of an Ultrafast Ti:Sapphire Laser System (University of Limerick)
Delivery, Supply & Installation of an Ultrafast Ti:Sapphire Laser System to the University of Limerick. NOTE: To register your interest in this notice and obtain any additional information please visit the eTenders Web Site at http://www.etenders.gov.ie/Search/Search_Switch.aspx?ID=434812. View the procurement »
Delivery, Supply & Installation of an Ultrafast Ti:Sapphire Laser System to the University of Limerick. NOTE: To register your interest in this notice and obtain any additional information please visit the eTenders Web Site at http://www.etenders.gov.ie/Search/Search_Switch.aspx?ID=434812. View the procurement »