Procurements: Repair and maintenance services of precision equipment

One active procurement

Recent procurements of repair and maintenance services of precision equipment in Ireland

2026-05-06   Deadline 2026-06-10   Validation Technician Service (Irish Blood Transfusion Service)
This URS prospectively defines the requirements for the provision of Validation Technician Service in the IBTS. The general activities to be carried out by this service within the IBTS will include, but will not be confined to: 3. SCOPE The service provider shall support activities relating to: • equipment maintenance management • calibration management • requalification scheduling and coordination • corrective maintenance management • equipment documentation control • service provider coordination • … View the procurement »
2026-03-05   UCDOPP5535_Specialist Refrigeration, Ultra-Low Temperature, Air-Conditioning, Close-Control and Monitoring (University College Dublin ( UCD ))
UCDOPP5535- Specialist Refrigeration, Ultra-Low Temperature, Air-Conditioning, Close-Control and Monitoring View the procurement »
2026-02-27   Lot 1 Planned Preventative Maintenance Services for(CSSD) in Cork University Dental School and Hospital and Lot 2:... (University College Cork)
In summary, the Services comprise: Lot 1: Planned Preventative Maintenance Services for Central Sterilisation Service Department (CSSD) in Cork University Dental School and Hospital Lot 2: Validation Services for Central Sterilisation Service Department (CSSD) in Cork University Dental School and Hospital. The tender is divided into two distinct and separate lots as to ensure no conflict of interest can arise from one tenderer winning both lots. As a result tenderers are only allowed to submit a tender … View the procurement »
2026-01-30   CFT 3901 - Assessment and upgrade of Existing Scada System at Arthurstown Landfill (South Dublin County Council)
South Dublin County Council is proposing to engage the services of a suitably qualified contractor for the following works: a) The upgrade/replacement of the existing telemetry infrastructure. b) The maintenance of the New Telemetry Infrastructure for an initial 12-month period. (Quarterly Checks) View the procurement »
2025-09-16   LA3455F DAFM – RFT to Establish a Single Supplier Framework Agreement for the Supply, Delivery, Installation,... (Education Procurement Service (EPS))
Supply, Delivery, Installation, Commissioning, Calibration, staff training and maintenance of a temperature monitoring system for laboratory equipment. The 2 locations required are, 1. DAFM Laboratories Backweston, Celbridge, Co. Kildare. 2. DAFM Cork Laboratory, BTL, Model Farm Road, Cork, Co. Cork. The proposed Temperature Monitoring System is intended to be used for the temperature monitoring of laboratory equipment for: Incubators, Chill Cabinets, Freezers and Ovens. The Temperature Monitoring system … View the procurement »
2024-10-24   Request for Tenders for the provision of maintenance services for Met Eireann’s meteorological and environmental... (Met Eireann)
Met Éireann’s maintains a national network of automated climatological stations, which are referred to as CAMP network stations. The information from these sensors are recorded, stored and transmitted, utilising data loggers and associated communication equipment, to Met Éireann HQ, for input into the Met Éireann database. This tender relates to the provision of regular scheduled maintenance to these stations. The CAMP (Climate) network consists of 78 stations currently (this number is projected to … View the procurement »
2024-05-13   8854 Hand Tool and Equipment Calibration and Minor Repairs (Iarnrod Eireann-Irish Rail)
This is a call to competition by IE for the provision of specialised calibration services to the engineering departments within the organisation. The contract will involve calibrating but not limited to Hand Tools Digital Multi-Meters, Torque Wrenches and Dynamometers etc. Electrical Test Equipment Force Gauges, Infra-Red Thermometers and Oscilloscopes etc. Precision Measurement Equipment Dial Indicators, Digital Callipers and Feeler Gauges etc. Railway Track Tools P and C Track Gauges, Side Wear Gauges, … View the procurement »
2024-04-04   Test and Measurement Equipment Calibration and Repair Service (The Irish Air Navigation Service)
The Services requires the provision of Test and Measurement Equipment Calibration and Repair Services at various AirNav Ireland Locations in the state. To ensure a dependable accuracy of measurement, Engineers working on the AIRNAV IRELAND’s CNS/ATM (Communication, Navigation, Surveillance and Air Traffic Management) systems use calibrated test and measurement equipment. Where appropriate, all test equipment’s are calibrated to manufacturers and international standards. View the procurement »
2024-03-26   Aggregation of Calibration Tools and Gauges for the Irish Air Corps (Irish Defence Forces_1144)
This is a cascaded multi-party framework agreement for the provision of the aggregation of Calibration Tools and Gauges for the Irish Air Corps as described in Appendix 1 to this RFT (the “Services”)to The Irish Air Corps. The cascaded multi-party framework agreement will be established with a minimum of three (3) operators, subject to that number meeting the minimum criteria and rules as per 3.2 and 3.3 . View the procurement »
2022-12-06   Provision of Calibration Services for Pipettes, Balances, Temperature Mapping and Thermocyclers (Education Procurement Service (EPS))
Tenders are sought for Calibration Service for pipettes, balances, temperature mapping and thermocyclers for DAFM laboratories. Location: Backweston Campus Celbridge, Co. Kildare and Regional Locations including Cork, limerick, Kilkenny, Sligo, and Athlone. Lot 1 – Balances Lot 2 – Temperature Mapping Lot 3 – Pipettes Lot 4 – Thermocyclers View the procurement »
2022-02-28   Validation and Calibration Technician services (Irish Blood Transfusion Service)
validation and Calibration maintenance Technician View the procurement »
2021-10-01   Contract for Maintenance and Environmental Monitoring Support Services (Met Eireann)
Contract services for maintenance and support services for the Met Eireann environmental monitoring station at Valentia Island. Met Éireann’s contributes to Ireland’s Greenhouse Gas and Transboundary Air Pollution Monitoring Network through its commitment to the “European Monitoring and Evaluation Programme” (EMEP), Integrated Carbon Observation System (ICOS) and GHG emissions and Short Lived Climate Forcers (SLCF) monitoring programmes. Although Ireland is not a member of the programme, Met Éireann’s … View the procurement »
2021-07-23   Hand Tool and Equipment Calibration and Minor Repairs (Iarnrod Eireann-Irish Rail)
This is a call to competition by IE for the provision of specialised calibration services to the engineering departments within the organisation. The contract will involve calibrating (but not limited to) Hand Tools (Digital Multi-Meters, Torque Wrenches and Dynamometers etc.); Electrical Test Equipment (Force Gauges, Infra-Red Thermometers and Oscilloscopes etc.); Precision Measurement Equipment (Dial Indicators, Digital Callipers and Feeler Gauges etc.); Railway Track Tools (P&C Track Gauges, Side Wear … View the procurement »
2021-07-21   Contracted Services for the Electrical Maintenance and Technical Support of Diving Systems and Associated Equipment (Irish Naval Service)
The Irish Naval Service seeks tenders from economic operators for the provision of a service support contract for the electrical maintenance and technical support of diving systems and associated equipment. View the procurement »
2019-12-18   Zwick Equipment Servicing, Repair and Calibration in 2 Lots (National University of Ireland, Galway (NUI Galway))
Zwick materials testing equipment servicing (maintenance, repair and calibration) of both hardware and software, including replacement of load cells in 2 lots. Lot 1: Servicing of Zwick machines in biomedical dept; Lot 2: Servicing of Zwick machines in civil engineering dept. View the procurement »
2019-11-27   Flight Inspection Services (Irish Aviation Authority)
The IAA have a requirement for periodic and ad-hoc flight inspection services for navigation aids at Dublin, Cork and Shannon airports and also for flight procedure validation. The IAA also act as an agent for the co-ordination of flight inspections for the Irish Air Corp at Baldonnel. The current flight inspection programme covers all en-route navigation aids, terminal approach aids and landing aids. View the procurement »
2019-04-04   Teagasc — Request for Tenders for the Provision of Temperature Monitoring and Calibration Services of Small... (Education Procurement Service (EPS))
In summary, the Services comprise: the Provision of Temperature Monitoring and Calibration Services of Small Laboratory Equipment for Teagasc across seven (7) locations as follows; — Teagasc, Oak Park, Carlow, Co. Carlow, — Teagasc, Ashtown, Dublin 15, — Teagasc, Athenry, Co. Galway, — Teagasc, Grange, Dunsany, Co. Meath, — Teagasc, Johnstown Castle, Wexford, — Teagasc, Moorepark, Fermoy, Co. Cork (Food), — Teagasc, Moorepark, Fermoy, Co. Cork (Agric). This public procurement competition relates to … View the procurement »
2017-11-24   Validation Technician (Irish Blood Transfusion Service)
To maintain the Maintenance Schedule and associated documentation for the relevant site(s); — To maintain the Calibration / Requalification Schedule and associated documentation for the relevant site(s); — To maintain the corrective maintenance log and associated documentation for the relevant site(s); — To execute the maintenance schedule; — To execute the calibration / requalification schedule; — To liaise with laboratories / end user departments with respect to maintenance scheduling. View the procurement »
2017-07-12   Gas quality analysis and validation of gas analysers (Ervia)
Provision of a multi-party Framework Agreement for gas quality analysis, validation of gas analysers and supply of validation gas. View the procurement »
2016-08-04   Test and Measurement Equipment Calibration and Repair Service (Irish Aviation Authority)
To ensure a dependable accuracy of measurement, engineers working on the IAA's CNS/ATM systems use calibrated test and measurement equipment. Where appropriate, all test equipments are calibrated to manufacturers and international standards. View the procurement »
2015-12-10   4 Single-Party Framework Agreements for the Provision of Services in connection with the Central Sterile Services... (Beaumont Hospital)
The Contracting Authority intends to establish the following four single-party framework agreements: 1. Lot 1 — The Validation of Automatic Endoscope Reprocessors (AERs); 2. Lot 2 — The Validation of Endoscope Drying/Storage Units; 3. Lot 3 — The Validation of Low-Temperature Gas Sterilisation Units; 4. Lot 4 — Authorised Engineer (Decontamination) Services. Each lot will operate as a separate and distinct single-party framework agreement. If a tender is submitted for more than 1 lot, separate tender … View the procurement »
2012-12-21   FC - Flight Checking (Irish Aviation Authority)
Invitation to tender for the provision of Flight Calibration Services. View the procurement »
2012-02-20   Supply of Mechanical & Electrical Facilities Maintenance for Marine Institute (Marine Institute)
The Marine Institute, a semi State body, wishes to invite tenders for the supply of Mechanical & Electrical Facilities Maintenance for Marine Institute, Rinville, Oranmore, Co. Galway for a period of 3 years with an option to extend for a further 2 years. The building services to be managed under this contract will be limited to the mechanical and electrical systems and associated plant and equipment and the provision of a subcontracted part time Stores Assistant. All other building management services … View the procurement »
2011-06-02   Framework Agreement for the Provision of Laboratory Equipment, Consumables & Services (Health Service Executive (HSE))
The HSE wishes to procure and establish a multi-vendor Framework Agreement appointing qualified and competent service providers to meet the HSE requirements for the category of Laboratory equipment under the following lots: — lot A – Laboratory Equipment, — lot B – Refrigeration, — lot C – Laboratory Consumables, — lot D – Pipette & Temperature Monitoring/Calibration, — lot E – Validation Services, — lot F – Planned Maintenance/Breakdown Repair Services. NOTE: To register your interest in this notice and … View the procurement »