2023-10-02   On-Bus Works - Framework for Technology and Fabrication Works on Public Transport Buses 2024 to 2028 (National Transport Authority_1149)
The NTA is currently in procurement for two major projects: • Next Generation Automatic Vehicle Location (“NG AVL”); and • Next Generation Ticketing (“NGT”). These procurements will progress to implementation phases starting in Q4 2023 and they will require vehicle location, displays, sensors and ticketing equipment to be installed on all NTA buses (existing and new) in the coming years. This tender competition aims to put in place a Framework Agreement to enable Clients to perform enabling works on … View the procurement »
2023-03-01   Supply of a Direct Air Capture industrial prototype to Trinity College (Trinity College Dublin, the University of Dublin)
Researchers within Trinity College Dublin have developed and designed the Carbon Impact system, a device that captures carbon dioxide (CO2) from the air using a high performance adsorbent, in a Temperature Vacuum Swing Adsorption (TVSA) process. A full design has been developed in a previous project and the team is now looking for a supplier to build the system. Trinity College Dublin is therefore seeking a suitable mechanical engineering contractor (hereafter MEC) that can facilitate the building of the … View the procurement »
Mentioned suppliers: STREICHER, spol. s r.o. Plzen
2022-03-29   21/105 - Brighouse Bay Station Splitting (GNI (UK) Ltd)
Brighouse Bay Compressor Station, in Southwest Scotland, contains two turbine halls, each containing three gas driven compressors. Upstream of the turbine halls is a shared header and filtration system and downstream of the turbine halls are outlets to Interconnector 1( IC1) and Interconnector 2 (IC2) and pipework interconnecting the ICs. This project entails the addition of a new filter and a number of valves and pipework modifications to effectively split the station’s operational configuration and … View the procurement »
2022-02-02   Marine Substructures Supply, Transport & Installation (Sure Partners Limited)
Arklow Bank Wind Park Phase 2 (“Project”) is an offshore wind farm located approximately 6km to 15km off the coast of Arklow, Co. Wicklow and covers an area approximately 27km long and 2.5km wide. The Project will have a Maximum Export Capacity (MEC) of up to 800MW and will consist of up to approximately 62 turbines and will participate in Ireland’s first Offshore auction in late 2022 / early 2023. View the procurement »
2022-02-02   Inter Array Cables Supply, Transport & Installation (Sure Partners Limited)
Arklow Bank Wind Park Phase 2 (“Project”) is an offshore wind farm located approximately 6km to 15km off the coast of Arklow, Co. Wicklow and covers an area approximately 27km long and 2.5km wide. The Project will have a Maximum Export Capacity (MEC) of up to 800MW and will consist of up to approximately 62 turbines and will participate in Ireland’s first Offshore auction in late 2022 / early 2023. View the procurement »
2022-02-02   Marine Substructures Transport & Installation (Sure Partners Limited)
Arklow Bank Wind Park Phase 2 (“Project”) is an offshore wind farm located approximately 6km to 15km off the coast of Arklow, Co. Wicklow and covers an area approximately 27km long and 2.5km wide. The Project will have a Maximum Export Capacity (MEC) of up to 800MW and will consist of up to approximately 62 turbines and will participate in Ireland’s first Offshore auction in late 2022 / early 2023. View the procurement »
2022-02-02   Wind Turbine Generator Substructure Supply (Sure Partners Limited)
Arklow Bank Wind Park Phase 2 (“Project”) is an offshore wind farm located approximately 6km to 15km off the coast of Arklow, Co. Wicklow and covers an area approximately 27km long and 2.5km wide. The Project will have a Maximum Export Capacity (MEC) of up to 800MW and will consist of up to approximately 62 turbines and will participate in Ireland’s first Offshore auction in late 2022 / early 2023. View the procurement »
2022-01-10   Multi-party Framework Agreement for the provision of Design, Fabrication and Installation of Educational and... (Bord Iascaigh Mhara - Irish Sea Fisheries Board ( BIM ))
In summary, the Services comprise of the design, fabrication, transport and installation of temporary or permanent sets, exhibits, user services and information resources throughout Ireland for educational or interpretive purposes to allow a broad range of users from media, seafood industry, marine stakeholders, state agencies, tourism stakeholders and the general public to engage positively with, and understand and appreciate, the Irish seafood through high quality, engaging, educational and informative … View the procurement »
Mentioned suppliers: Display Contracts International Limited Vinehall Displays
2021-09-10   MPFA for branding development, design of signage, management of procurement of manufacture and installation of... (South Dublin County Council)
Multiparty Framework for branding development and design of signage and management of the procurement, manufacture and installation of the signage; with an initial contract for the branding development and design of signage and management of the procurement, manufacture and installation of signage for Kiltipper Park and the Greenways therein. View the procurement »
Mentioned suppliers: Gemperson Ltd T/A Wayfinder Systems
2021-04-28   To Provide Parkets and Cycle Stands for Galway City and Salthill (Galway City Council)
Galway City Council is seeking to appoint a service provider for the fabrication, provision and installation of designed parklet units at locations throughout the city, at a number of inland and exposed coastal locations. Detailed design specifications will be issued at tender stage through innovative partnership tender. The units are for construction exclusively in marine-grade stainless steel, hardwood, stone, composite recycled boarding and soft landscaping/planting for a minimum design lifespan of 20 … View the procurement »
Mentioned suppliers: Kent Stainless
2021-02-01   Qualification System for the Fabrication of Steel Materials (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) invites applications from suitably qualified companies to participate in the pre-qualification process to establish a qualification system for the fabrication of steel materials. This contract will have two lots: Lot 1: Supply and delivery of fabrication of steel materials; Lot 2: Design of bespoke items. View the procurement »
2020-07-27   Supply and Delivery of Panels (Dublin Bus/Bus Atha Cliath)
The purpose of this pre-qualifying questionnaire (PQQ) is to enable the contracting entity to evaluate the suitability of applicants and to arrive at a shortlist of potential suppliers for a framework. It is intended that following the PQQ evaluation a number of applicants will be invited to tender for the specific requirements of the framework. The framework will be for a period of 3 years with a provision for two 1-year extensions. The value over the 5 years is estimated at EUR 600 000. View the procurement »
2020-07-03   Metal Fabrication Multi Party Framework (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) invites suitably qualified and experienced companies to participate in a tender process for the establishment of a multiparty metal fabrication services framework to meet the needs of all IÉ locations nationwide. This tender was previously advertised on RFT 168388/OJEU Reference 2020/S 106-257953. The requirement to re-advertise was due to changes in the requested standards to lots 2 and lot 3. Requirements can range from standard fabrication such as bracketry and hinges to more … View the procurement »
2020-06-03   Multi Supplier Framework Agreement for Unplanned Building Maintenance Services (Bus Eireann/Irish Bus)
Bus Éireann proposes establishing a new framework agreement for the provision of unplanned building maintenance services to a number of sites, accommodation units and facilities located throughout the Republic of Ireland for a four (4) year period. Bus Éireann has a requirement for the following eight service disciplines on an on-demand basis: • building maintenance works, • mechanical and electrical services, • painting and decorating, • GAS services, • roofing specialist, • heating and ventilation … View the procurement »
2020-05-29   Metal Fabrication Multi Party Framework (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) invites suitably qualified and experienced companies to participate in a tender process for the establishment of a multiparty metal fabrication services framework to meet the needs of all IÉ locations nationwide. These services can range from standard fabrication requirements such as bracketry and hinges to more bespoke designed components which may require specialised welding. Only companies with suitable fabrication expertise and experience in accordance with the requirements of … View the procurement »
2019-12-16   19/120 — Provision of Network Services and Works to Gas Networks Ireland (Ervia)
The contracting entity on behalf of Gas Networks Ireland (GNI) intends to progress with the procurement of national network services and works contracts. The national network services and works contracts are divided into 2 separate lots, with each lot awarded separately. As per the PQQ document. View the procurement »
Mentioned suppliers: GMC Civil & Mechanical Engineering Ltd Murphy International Ltd
2019-08-20   19/122 — Beattock Compressor Station Upgrades (Ervia)
Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland. The scope will include the construction, installation, commissioning and certification of the new temporary bypass tie-ins, splitting of suction and discharge headers, suction throttling facility and AGI DCS control system integration. The works will require interfaces with existing site infrastructure and equipment such as the suction and discharge headers, existing pipework, compressor … View the procurement »
Mentioned suppliers: Murphy International Ltd
2019-03-04   Douglas FRS_Douglas Works Package (Cork County Council)
Construction of flood defence works in Douglas and environs. The proposed works are described in the drawings and specifications. Works will include the construction of new flood defence walls (reinforced concrete and precast elements), reconstruction of existing bridges, new reinforced concrete culverts, drainage and utility diversions, hard and soft landscaping and other associated works. View the procurement »
Mentioned suppliers: McGinty and O'Shea Ltd
2017-02-28   Supply of track side cabinets for GSM-R communications (Iarnrod Eireann-Irish Rail)
Iarnród Éireann — Irish Rail which is the state owned railway of Ireland has a requirement for IP rated track side cabinets for the roll out of GSM-R network. We require circa 200 cabinets over 5 years with a requirement for circa 50 this year. View the procurement »
Mentioned suppliers: Rivval Limited
2016-02-17   Metal Fabrication Qualification System (Iarnrod Eireann-Irish Rail)
Iarnród Éireann (IÉ) wish to establish a qualification system (QS) for the provision of metal fabrication services. Metal fabrication services are required to support the ongoing maintenance of the rolling stock fleet and general infrastructure (railings, station maintenance, etc.) for both preventative maintenance and modification works. IÉ spend in the region of 200 000 EUR per annum on metal fabrication services with the vast majority of requirements costing between 1 000 EUR and 3 000 EUR. On … View the procurement »
2015-09-25   Metal Fabrication Services (Iarnrod Eireann-Irish Rail)
The Chief Mechanical Engineer (CME), Chief Civil Engineer (CCE), Signal and Electrical (SET) and Building and Facilities (B&F) divisions of Iarnród Éireann (IÉ) have small scale regular requirements for Metal Fabrication Services using mild steel, stainless steel and aluminium. IÉ are therefore seeking applications from suitably qualified and experienced companies to participate in the Pre- qualification process to establish a multi-party framework agreement for Metal Fabrication Services on an ongoing … View the procurement »
2015-08-06   Metal Fabrication Services (Iarnrod Eireann-Irish Rail)
The Chief Mechanical Engineer (CME), Chief Civil Engineer (CCE), Signal and Electrical (SET) and Building and Facilities (B&F) divisions of Iarnród Éireann (IÉ) have small scale regular requirements for Metal Fabrication Services using mild steel, stainless steel and aluminium. IÉ are therefore seeking applications from suitably qualified and experienced companies to participate in the pre qualification process to establish a multiparty framework agreement for Metal Fabrication and Services on an ongoing … View the procurement »
2015-05-14   Maintenance and fabrication (Dublin Bus / Bus Atha Cliath)
Dublin Bus Require the services of a General Maintenance and Fabrication Company to service its buildings and its environs. View the procurement »
Mentioned suppliers: Christy Byrne
2015-01-28   Supply and Delivery of Inspection Trolleys (Iarnrod Eireann-Irish Rail)
IÉ is undertaking a programme of repairs and maintenance on the Drogheda Viaduct at Drogheda, Co Louth. This is a large steel viaduct with 3 spans of 41, 82 and 41 m respectively. The viaduct spans over the River Boyne in Co Louth. A part of this scheme is to renew 3 underslung inspection trolleys. These trolleys are to run on an existing rail and each will operate with manual propulsion. The trolleys all have minor differences in their span however they are approximately span of the trolley is 6 850 m. … View the procurement »
2014-05-02   CCE5261 – Framework Agreement for the provision of structural engineering steel fabrication services to Iarnród... (Iarnrod Eireann-Irish Rail)
Iarnród Éireann are proposing to set up a framework for the provision of structural engineering steel fabrication services as outlined below. Iarnrod Eireann will provide all details in relation to survey reports, specifications, drawings, sketches, photographs and other information required to the steel fabrication specialist for the production and submission of fabrication shop drawings, details, and layouts as required, and the manufacture, supply, delivery and installation of fabricated steelworks, … View the procurement »
2012-12-21   Ringsend Waste Water Treatment Works Extension Project - Long Sea Outfall Tunnel (Dublin City Council)
The design and construction/execution of a ‘treated effluent' marine outfall system from the Ringsend Waste Water Treatment Works (WwTW) to the Irish Sea in Dublin Bay including: - A c. 9 km Long Sea Outfall Tunnel (LSOT), c. 5m internal diameter, constructed in bedrock; - An inlet shaft located onshore with an internal diameter of c. 20 m and up to 110 m deep. - A c. 4 m diameter offshore marine riser shaft terminating in a ‘treated effluent' diffuser head structure located in marine water depths of 25 … View the procurement »