Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction, installation, commissioning and certification of the new temporary bypass tie-ins, splitting of suction and discharge headers, suction throttling facility and AGI DCS control system integration. The works will require interfaces with existing site infrastructure and equipment such as the suction and discharge headers, existing pipework, compressor buildings, site electrical system, SCADA, ducting, drainage and existing civil layout. The works will require liaison throughout the project duration with various stakeholders, particularly the clients operations team and engineers.
For further information please refer to PQQ document.
Deadline
The time limit for receipt of tenders was 2019-09-23.
The procurement was published on 2019-08-20.
Suppliers
The following suppliers are mentioned in award decisions or other procurement documents:
Object Scope of the procurement
Title: 19/122 — Beattock Compressor Station Upgrades
19/122
Products/services: Construction work for gas pipelines📦
Short description:
“Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction,...”
Short description
Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction, installation, commissioning and certification of the new temporary bypass tie-ins, splitting of suction and discharge headers, suction throttling facility and AGI DCS control system integration. The works will require interfaces with existing site infrastructure and equipment such as the suction and discharge headers, existing pipework, compressor buildings, site electrical system, SCADA, ducting, drainage and existing civil layout. The works will require liaison throughout the project duration with various stakeholders, particularly the clients operations team and engineers.
For further information please refer to PQQ document.
Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction, installation, commissioning and certification of the new temporary bypass tie-ins, splitting of suction and discharge headers, suction throttling facility and AGI DCS control system integration. The works will require interfaces with existing site infrastructure and equipment such as the suction and discharge headers, existing pipework, compressor buildings, site electrical system, SCADA, ducting, drainage and existing civil layout. The works will require liaison throughout the project duration with various stakeholders, particularly the clients operations team and engineers.
The construction stage will include:
1) Pre-construction works including site-investigations and surveys, HAZCON, preparation of all HSQE documentation and programming and sequencing to ensure station operation is maintained;
2) Installation of a temporary supply to maintain station operations during works;
3) Installation of pipe arrangement to split suction and discharge headers;
4) Installation of suction throttling arrangement;
5) Liaise and assist C&I contractor for SCS integration;
6) Testing, snagging, commissioning and site acceptance tests.
Handover to client with complete H&S File including all records, residual risk register, full life cycle O&M schedule and manuals.
For further information please refer to PQQ document.
Show more Award criteria
Price is not the only award criterion and all criteria are stated only in the procurement documents
Duration of the contract, framework agreement or dynamic purchasing system
The time frame below is expressed in number of months.
Description
Duration: 12
Information about the limits on the number of candidates to be invited
Envisaged number of candidates: 5
Description
Additional information:
“You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and...”
Additional information
You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and time specified in the PQQ documents. Please note that all tenders are electronic, as such no paper copies will be accepted or read. Please submit via the etenders system not later than 12.00 local time 23.9.2019.
Legal, economic, financial and technical information Conditions for participation
List and brief description of conditions:
“Please refer to tender documents available to download from www.etenders.gov.ie only.” Economic and financial standing
Selection criteria as stated in the procurement documents
Technical and professional ability
Selection criteria as stated in the procurement documents
Conditions for participation
Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
“Requests to participate may be submitted by single entities or by groups of service providers. A group will not be required to convert into a specific legal...”
Legal form to be taken by the group of economic operators to whom the contract is to be awarded
Requests to participate may be submitted by single entities or by groups of service providers. A group will not be required to convert into a specific legal form in order to submit a request to participate, but may if the contracting entity considers it necessary to ensure that the contract is carried out to its satisfaction, be required to do so prior to award of the contract. The contracting entity also reserves the right to contract with each member of the group on the basis of joint and several liability, or with 1 member of the group as a main contractor with a number of subcontractors or on any other basis as the contracting entity considers appropriate.
Procedure Type of procedure
Negotiated procedure with prior call for competition
Administrative information
Time limit for receipt of tenders or requests to participate: 2019-09-23
12:00 📅
Languages in which tenders or requests to participate may be submitted: English 🗣️
Languages in which tenders or requests to participate may be submitted: Irish 🗣️
The time frame below is expressed in number of months.
Minimum time frame during which the tenderer must maintain the tender: 6
Complementary information Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
Additional information
“You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and...”
You must submit through the etenders system before the deadline. The submission deadline is strict and no submissions will be possible after the date and time specified in the PQQ documents. Please note that all tenders are electronic, as such no paper copies will be accepted or read. Please submit via the etenders system not later than 12.00 local time 23.9.2019.
Show more Review body
Name: The High Court
Postal address: High Court Central Office, Four Courts, Inns Quay
Postal town: Dublin
Postal code: 7
Country: Ireland 🇮🇪
Phone: +35 318886000📞
E-mail: highcourtcentraloffice@courts.ie📧
URL: http://www.courts.ie🌏 Review procedure
Precise information on deadline(s) for review procedures:
“Please refer to Statutory Instrument 131 of 2010, European Communities (Award of Contracts by Utility Undertaking) (Review Procedures) Regulations 2010 (and...”
Precise information on deadline(s) for review procedures
Please refer to Statutory Instrument 131 of 2010, European Communities (Award of Contracts by Utility Undertaking) (Review Procedures) Regulations 2010 (and in particular Regulation 7 and 10(2)).
Show more
Source: OJS 2019/S 162-399380 (2019-08-20)
Contract award notice (2021-09-28) Contracting authority Name and addresses
Postal address: P.O.Box 900, Webworks, Eglinton Street
Postal code: Cork
Information about joint procurement
The contract is awarded by a central purchasing body
Object Scope of the procurement
Title: 19/122 - Beattock Compressor Station Upgrades
19/122
Short description:
“Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction,...”
Short description
Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction, installation, commissioning and certification of the new temporary bypass tie-ins, splitting of suction and discharge headers, suction throttling facility and AGI DCS control system integration. The works will require interfaces with existing site infrastructure and equipment such as the suction and discharge headers, existing pipework, compressor buildings, site electrical system, SCADA, ducting, drainage and existing civil layout. The works will require liaison throughout the project duration with various stakeholders, particularly the Clients Operations Team and Engineers.
For further information please refer to PQQ document.
Show more Description
Main site or place of performance: Scotland
Description of the procurement:
“Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction,...”
Description of the procurement
Contract for the construction of facility upgrades/modifications at GNI UK Beattock Compressor Station in Scotland.
The scope will include the construction, installation, commissioning and certification of the new temporary bypass tie-ins, splitting of suction and discharge headers, suction throttling facility and AGI DCS control system integration. The works will require interfaces with existing site infrastructure and equipment such as the suction and discharge headers, existing pipework, compressor buildings, site electrical system, SCADA, ducting, drainage and existing civil layout. The works will require liaison throughout the project duration with various stakeholders, particularly the Clients Operations Team and Engineers.
The construction stage will include:
1 Pre-construction works including site-investigations and surveys, HAZCON, preparation of all HSQE documentation and programming and sequencing to ensure station operation is maintained
2 Installation of a temporary supply to maintain station operations during works
3 Installation of pipe arrangement to split suction and discharge headers.
4 Installation of suction throttling arrangement
5 Liaise and assist C&I contractor for SCS integration
6 Testing, Snagging, Commissioning and Site Acceptance Tests
Handover to Client with complete H&S File including all records, residual risk register, full life cycle O&M schedule and manuals
For further information please refer to PQQ document.
Show more
Additional information:
“You must submit through the etenders system before the deadline. The submission deadline is strict & no submissions will be possible after the date & time...”
Additional information
You must submit through the etenders system before the deadline. The submission deadline is strict & no submissions will be possible after the date & time specified in the PQQ documents. Please note that all tenders are electronic, as such NO paper copies will be accepted or read. Please submit via the etenders system not later than 12:00 hrs local time Monday 23rd September 2019
Procedure Administrative information
Previous publication concerning this procedure: 2019/S 162-399380
Award of contract
1️⃣
Contract Number: 1
Title: 19/122 - Beattock Compressor Station Upgrades
Date of conclusion of the contract: 2021-03-08 📅
Information about tenders
Number of tenders received: 2
Name and address of the contractor
Name: Murphy International Ltd
National registration number: IE0837331Q
Postal address: Great Connell
Postal town: Co Kildare
Postal code: W12 HD61
Country: Ireland 🇮🇪
Region: Éire/Ireland🏙️
The contractor is an SME
Complementary information Additional information
“You must submit through the etenders system before the deadline. The submission deadline is strict & no submissions will be possible after the date & time...”
You must submit through the etenders system before the deadline. The submission deadline is strict & no submissions will be possible after the date & time specified in the PQQ documents. Please note that all tenders are electronic, as such NO paper copies will be accepted or read. Please submit via the etenders system not later than 12:00 hrs local time Monday 23rd September 2019
Show more Review body
Postal address: High Court Central Office, Four Courts, Inns Quay,
Review procedure
Precise information on deadline(s) for review procedures:
“Precise information on deadline(s) for review procedures:
Please refer to Statutory Instrument 131 of 2010, European Communities (Award of Contracts by...”
Precise information on deadline(s) for review procedures
Precise information on deadline(s) for review procedures:
Please refer to Statutory Instrument 131 of 2010, European Communities (Award of Contracts by Utility Undertaking) (Review Procedures) Regulations 2010 (and in particular Regulation 7 and 10(2)).
Show more
Source: OJS 2021/S 191-497948 (2021-09-28)