2023-02-28Supply of Bus Stop Poles and Flags (1) (National Transport Authority)
The Authority has identified a need for further dissemination of public transport information at bus stops nationally and intends to erect new Bus Stop Poles, to be installed in foundation/ground retention sockets, and with information display units, at bus stops nationally.
The proposed poles will permit interchange ability of flags procured under this tender in order to facilitate a process for updating route information to be displayed on printed vinyl attached to the flag (by others).
In addition …
View the procurement »
2022-06-23Supply of Bus Stop Pole Information Display Units (National Transport Authority)
The Authority is seeking a supplier to provide two sizes of Display Units for installation on new Bus Stop Poles. The intended duration of the Contract is a three (3) year period. The Authority may renew the contract for an additional one (1) year period, subject to satisfactory performance, cost effectiveness and a continuing requirement for the supply of Display Units. The scope includes the delivery of the Display Units as required in accordance with the RFT and training of the Authority’s nominated …
View the procurement » Mentioned suppliers:Larkin Street Products
2022-02-23Supply of Bus Stop Pole and RTPI Pole Foundation Sockets (National Transport Authority)
The Authority is seeking a supplier to provide Foundation Sockets for the installation of new Bus Stop Poles and also to provide Foundation Sockets for the installation of RTPI Poles. For the avoidance of doubt, there are separate foundation sockets required for each use. The Foundation Socket for the Bus Stop Pole shall be capable of securing 60.3mm diameter pole vertically and the design shall mitigate the potential for rotation of the pole around its vertical axis. Likewise, the Foundation Socket for …
View the procurement » Mentioned suppliers:Ipl Group
2022-02-21Supply of Bus Stop Pole and RTPI Pole Foundation Sockets (National Transport Authority)
The Authority is seeking a supplier to provide Foundation Sockets for the installation of new Bus Stop Poles and also to provide Foundation Sockets for the installation of RTPI Poles. For the avoidance of doubt, there are separate foundation sockets required for each use. The Foundation Socket for the Bus Stop Pole shall be capable of securing 60.3mm diameter pole vertically and the design shall mitigate the potential for rotation of the pole around its vertical axis. Likewise, the Foundation Socket for …
View the procurement »
2019-09-05Supply of Bus Stop Poles and Flags (National Transport Authority)
The authority has identified a need for further dissemination of public transport information at bus stops nationally and intends to erect new bus stop poles, to be installed in foundation/ground retention sockets, and with information display units, at bus stops nationally.
The proposed poles will permit interchange ability of flags procured under this tender in order to facilitate a process for updating route information to be displayed on printed vinyl attached to the flag (by others).
In addition …
View the procurement » Mentioned suppliers:Larkin Street Products
2018-06-01Supply of Bus Stop Poles and Flags (National Transport Authority)
The Authority has identified a need for further dissemination of public transport information at bus stops nationally and intends to erect new Bus stop poles, to be installed in foundation/ground retention sockets, and with information display units, at bus stops nationally.
The proposed poles will permit interchange ability of flags procured under this tender in order to facilitate a process for updating route information to be displayed on printed vinyl attached to the flag (by others).
In addition …
View the procurement » Mentioned suppliers:Trueform Engineering
2018-05-25Supply of Bus Stop Pole Information Display Units (National Transport Authority)
The Authority is seeking a supplier to provide Display Units for installation on new Bus stop poles. The Display Units shall be provided in 2 sizes, be double sided and be capable of rotating 360 degrees on the Bus Stop Pole. The height of the Display Unit should be adjustable. The Display Units will be used to display bus travel information on printed waterproof material. The Display Units shall facilitate multiple interchange of information sheets as required by the Authority over the life of the …
View the procurement » Mentioned suppliers:Larkin Engineering Enterprises Ltd
2018-05-17Supply of Bus Stop Pole Foundation Sockets (National Transport Authority)
The Authority is seeking a supplier to provide Foundation Sockets for the installation of new Bus Stop Poles. The Foundation Sockets shall be capable of securing 60,3 mm diameter Bus Stop Poles vertically and the design shall mitigate the potential for rotation of the pole around its vertical axis. The Foundation Sockets shall be capable of facilitating the replacement of damaged Bus Stop Poles without necessity for interference with the foundation. If required, an adapter is permissible to allow the …
View the procurement » Mentioned suppliers:Ipl Group
2014-08-05Supply of Bus Stop Timetable Display Units (National Transport Authority)
The Authority is seeking a supplier to provide bus stop timetable information display units suitable for attachment to new 60,3 mm diameter stainless steel (and painted steel) bus stop poles. The intended duration of the Contract is a two (2) year period.
The height of the bus timetable information unit should be adjustable. Typical heights from ground level to the underside of the visible printed area will be between 0,9 m and 1,5 m.
The units will be used to display bus travel information on printed …
View the procurement » Mentioned suppliers:Larkin Engineering Enterprises Limited
2014-07-31Supply of Bus Stop Pole Foundation Sockets (National Transport Authority)
The Authority has identified a need for further dissemination of public transport information at bus stops nationally and intends to erect new bus poles, to be installed with foundation/ground sockets, and information display units at bus stops nationally. Section 3 of the Request for Tenders details the Specification for Bus Pole Foundation Sockets required of the successful Tenderer.
View the procurement » Mentioned suppliers:Ipl Group
2012-02-14Supply, installation and maintenance of bus stop poles, bushead plates and information display cases (Bus Eireann/Irish Bus)
The Contracting Authority proposes awarding a contract for the supply, installation and maintenance of bus stop poles, bus head plates and information display cases for a period of 3 years. The Contracting Authority reserves the right to extend this contract(s) for a further period of 12 or 24 months. The purpose of the pre-qualification questionnaire is to obtain sufficient information to enable the Contracting Authority to evaluate the suitability of applicants with the necessary resources and capacity …
View the procurement »