Eliteform-Project-2026-4 Roll plate Bending Machine

Eliteform Manufacturing Ltd

Eliteform Manufacturing Ltd invite tenders for the supply of a heavy-duty 4-roll hydraulic plate rolling machine for industrial forming of mild steel, aluminium and stainless steel plates. The machine shall be capable of precision rolling of plates up to: • 4.0 mm mild steel • 3.0 mm stainless steel • Maximum working length: 4000 mm The machine shall be designed for continuous industrial production with high precision, repeatability, and long service life. Requirments; • The top and bottom rolls shall be: o Fully motorised o Driven through heavy-duty gearboxes and hydraulic motors • The side rolls shall be guided by a planetary guide movement system to ensure: o Accurate positioning o Uniform load distribution o Long bearing life • All rolls shall be mounted using double-crown spherical roller bearings in single-bearing configuration per roll. o Configurations using two separate single-crown bearings per roll are not acceptable, due to:  Higher mechanical stress  Reduced rigidity  Lower performance when rolling narrow plates • Roll movements shall be actuated by hydraulic cylinders in a parallel system configuration. • Each cylinder shall be controlled through independent hydraulic circuits to guarantee: o Accurate parallelism of rolls o Uniform pressure distribution o High rolling precision Performance Requirements • Maximum plate thickness: o 4.0 mm mild steel o 3.0 mm stainless steel • Maximum working length: 4000 mm • Maximum roll rotation speed: 6 metres per minute • The machine shall be capable of: o Pre-bending on both ends o Rolling cylindrical and conical sections o Producing uniform diameters across full length Crowning and Deflection Compensation • The machine shall be equipped with Dynamic Crowning system. • The system shall automatically: o Deflect the bottom roll upward to match top roll deflection o Clamp the plate across its entire working width • The crowning system shall: o Reduce or eliminate canoeing / barrel defects o Improve diameter consistency along the full length o Increase the effective rolling thickness range o Enhance rolling accuracy for both narrow and wide plates General Requirements • Machine shall be designed for: o Heavy industrial duty o Long service life o High dimensional accuracy • All components shall comply with relevant CE and machinery safety standards. • Supplier shall provide: o Full technical documentation o Machine layout and foundation drawings o Hydraulic and electrical schematics o Operator and maintenance manuals

Deadline

The time limit for receipt of tenders was 2026-04-17. The procurement was published on 2026-03-18.

Who? What? Where?
Procurement history
Date Document
2026-03-18 Contract notice
Contract notice (2026-03-18)
Object
Scope of the procurement
Title: Eliteform-Project-2026-4 Roll plate Bending Machine
Short description:
Eliteform Manufacturing Ltd invite tenders for the supply of a heavy-duty 4-roll hydraulic plate rolling machine for industrial forming of mild steel, aluminium and stainless steel plates. The machine shall be capable of precision rolling of plates up to: • 4.0 mm mild steel • 3.0 mm stainless steel • Maximum working length: 4000 mm The machine shall be designed for continuous industrial production with high precision, repeatability, and long service life. Requirments; • The top and bottom rolls shall be: o Fully motorised o Driven through heavy-duty gearboxes and hydraulic motors • The side rolls shall be guided by a planetary guide movement system to ensure: o Accurate positioning o Uniform load distribution o Long bearing life • All rolls shall be mounted using double-crown spherical roller bearings in single-bearing configuration per roll. o Configurations using two separate single-crown bearings per roll are not acceptable, due to:  Higher mechanical stress  Reduced rigidity  Lower performance when rolling narrow plates • Roll movements shall be actuated by hydraulic cylinders in a parallel system configuration. • Each cylinder shall be controlled through independent hydraulic circuits to guarantee: o Accurate parallelism of rolls o Uniform pressure distribution o High rolling precision Performance Requirements • Maximum plate thickness: o 4.0 mm mild steel o 3.0 mm stainless steel • Maximum working length: 4000 mm • Maximum roll rotation speed: 6 metres per minute • The machine shall be capable of: o Pre-bending on both ends o Rolling cylindrical and conical sections o Producing uniform diameters across full length Crowning and Deflection Compensation • The machine shall be equipped with Dynamic Crowning system. • The system shall automatically: o Deflect the bottom roll upward to match top roll deflection o Clamp the plate across its entire working width • The crowning system shall: o Reduce or eliminate canoeing / barrel defects o Improve diameter consistency along the full length o Increase the effective rolling thickness range o Enhance rolling accuracy for both narrow and wide plates General Requirements • Machine shall be designed for: o Heavy industrial duty o Long service life o High dimensional accuracy • All components shall comply with relevant CE and machinery safety standards. • Supplier shall provide: o Full technical documentation o Machine layout and foundation drawings o Hydraulic and electrical schematics o Operator and maintenance manuals
Show more
Type of contract: Supplies
Products/services: Bending, folding, straightening or flattening machines 📦
Estimated value excluding VAT: 120 000 EUR 💰
Description
Internal identifier: 0
Quantity: 1
This procurement is also suitable for small and medium-sized enterprises (SMEs) ✅
Aim of strategic procurement: Innovative purchase
Eliteform Manufacturing has considered environmental and sustainability factors in this procurement. The specification includes requirements for energy-efficient machinery, minimisation of waste, and compliance with relevant environmental standards. Suppliers are encouraged to propose solutions that reduce energy consumption and environmental impact over the lifecycle of the equipment. The procurement also considers social objectives, including adherence to health and safety standards and the provision of appropriate training for operators. Innovative solutions that improve efficiency, productivity, and environmental performance will be considered as part of the evaluation process.
Show more
Innovation procurement: The procured works, supplies, or services entail process innovation
Town: Castlebellingham
Country: Ireland 🇮🇪
Place of performance: Mid-East 🏙️
Duration: 1 months
Title
Lot Identification Number: LOT-0001

Procedure
Type of procedure
Open procedure ✅
Legal basis: Other
Administrative information
Time limit for receipt of tenders or requests to participate: 2026-04-17 00:00:00 📅
Languages in which tenders or requests to participate may be submitted: English 🗣️
Minimum time frame during which the tenderer must maintain the tender: 30 days
Tendering terms
Tenderers may submit more than one tender
Deadline for requesting additional information: 2026-03-30 00:00:00 📅

Contracting authority
Name and addresses
Name: Eliteform Manufacturing Ltd
National registration number: 370585
Postal address: Dromiskin Road Castlebellingham Co Louth
Postal code: A91HH93
Postal town: Castlebellingham
Region: Mid-East 🏙️
Country: Ireland 🇮🇪
E-mail: martin@eliteform.ie 📧
Phone: 0876494282 📞
URL: https://eliteformmanufacturing.com/ 🌏
Address of the buyer profile: https://eliteformmanufacturing.com/ 🌏
Type of the contracting authority
Body governed by public law
Main activity
Housing and community amenities
Communication
Documents URL: https://www.etenders.gov.ie/epps/cft/listContractDocuments.do?resourceId=7739826 🌏
Participation URL: https://www.etenders.gov.ie/epps/cft/viewTenders.do?resourceId=7739826 🌏
Electronic submission: Required

Complementary information
Review body
Name: The High Court of Ireland
National registration number: The High Court of Ireland
Department: The High Court of Ireland
Postal address: Four Courts, Inns Quay, Dublin 7
Postal code: D07 WDX8
Postal town: Dublin
Region: Dublin 🏙️
Country: Ireland 🇮🇪
E-mail: highcourtcentraloffice@courts.ie 📧
Phone: +353 1 8886000 📞
Source: OJS 2026/S 055-189136 (2026-03-18)
New procurements in related categories 🆕
Related searches 🔍
Region:
Éire/Ireland Ireland Eastern and Midland Dublin Mid-East
Products/services:
Industrial machinery Machine tools Metal-working machine tools Bending, folding, straightening or...