Supply of solid-liquid extractor (e.g. screw extractor, screw press) for solid-liquid separation of fermented biomass to obtain an aqueous extract.
Lot 1: 1pcs, extractor for 4 000-4 600 kg/h;
Lot 2: 2 pcs, extractors each for 2 000-2 500 kg/h;
Lot 3: 1 pcs, extractor for 2 000-2 500 kg/h.
In order to enable the best possible (qualitative and economic) implementation, potential technology providers are invited to participate in this bidding procedure. The bidding procedure is carried out in two stages.
Deadline
The time limit for receipt of tenders was 2021-04-23.
The procurement was published on 2021-03-26.
Contract notice (2021-03-26) Contracting authority Name and addresses
Name: BRID-Biorefinery Research, Implementation and Development Ltd
Postal address: 40 Fana Burca, Knocknacarra
Postal town: Galway
Postal code: H91P6XR
Country: Ireland 🇮🇪
E-mail: martine.blaix@brid.ie📧
Region: Éire/Ireland🏙️
URL: https://brid.ie/🌏
Address of the buyer profile: https://brid.ie/🌏 Communication
Documents URL: https://gv.vergabeportal.at/Detail/100349🌏
Participation URL: https://gv.vergabeportal.at/Detail/100349🌏 Type of the contracting authority
Other type: Company for Biorefinery Research, Implementation and Development
Object Scope of the procurement
Title: Supply of Solid-liquid Extractor for Aqueous Plant Extracts
Products/services: Hydraulic presses📦
Short description:
“Supply of solid-liquid extractor (e.g. screw extractor, screw press) for solid-liquid separation of fermented biomass to obtain an aqueous extract.
Lot 1:...”
Short description
Supply of solid-liquid extractor (e.g. screw extractor, screw press) for solid-liquid separation of fermented biomass to obtain an aqueous extract.
Lot 1: 1pcs, extractor for 4 000-4 600 kg/h;
Lot 2: 2 pcs, extractors each for 2 000-2 500 kg/h;
Lot 3: 1 pcs, extractor for 2 000-2 500 kg/h.
In order to enable the best possible (qualitative and economic) implementation, potential technology providers are invited to participate in this bidding procedure. The bidding procedure is carried out in two stages.
Show more Information about lots
Tenders may be submitted for all lots
Maximum number of lots that may be awarded to one tenderer: 1
1️⃣ Scope of the procurement
Title:
“Lot 1: Extractor (Screw Extractor, Screw Press) Suitable for a Raw Material Throughput of 4 000-4 600 kg/h” Title
Lot Identification Number: 1
Description
Additional products/services: Sewage presses📦
Additional products/services: Hydraulic presses📦
Additional products/services: Machinery for preparing animal feeding stuffs📦
Additional products/services: Machinery for the industrial preparation or manufacture of food or drink📦
Place of performance: Österreich 🏙️
Description of the procurement:
“Tenders are invited for the procurement of equipment for solid-liquid separation (e.g. screw extractors, screw presses, etc.) of various line sizes. The...”
Description of the procurement
Tenders are invited for the procurement of equipment for solid-liquid separation (e.g. screw extractors, screw presses, etc.) of various line sizes. The client would like to realise a solid-liquid separation of fermented biomass raw materials. The raw material fraction consists of grass-like biomasses, especially mixtures of grass/clover/alfalfa biomass, which is shredded to a cutting length of 3-10 cm and then subjected to a fixed-bed fermentation (ensiling). This results in a partial enzymatic and bacterial conversion of the biomass. The organic acids produced in the feedstock fermentation lower the pH value into the acidic range (pH 3.2 to 5.5) and cause partial cell disintegration. The solid-liquid separation technology envisaged must be particularly suitable for dewatering of the described raw material to obtain extracts from it.
The plant for solid-liquid separation/extractor delivers a dewatered solid extraction residue (press cake) of ≥ 38 % DM from the previously described feed material with an initial consistency of DM 20 %; or delivers a dewatered solid extraction residue (press cake) of ≥ 40 % DM from the feed material with an initial consistency of DM 25 %. The plant for solid-liquid separation/extractor is controllable with regard to essential pressing parameters (speed, contact pressure, throughput) and has a PLC -system including emergency shutdown, which enables automated operation.
With regard to the required raw material throughputs, different LOTs were defined, which are to be considered as variants of the implementation.
Lot 1: extractor (screw extractor, screw press) suitable for a raw material throughput of 4 000-4 600 kg/h.
The solid-liquid separation system / extractor meets the following requirements:
1) Suitability for feedstock: feedstock is fermented (ensiled) grass/clover/alfalfa biomass shredded to a chop length of 3-10 cm, slightly acidic (pH - value in the range 3.2 to 5.5) with an initial consistency of 20 % dry matter (and above);
2) Dewatering targets: at an initial feed consistency of 20 % DM, a solid dewatered extraction residue (press cake) of ≥ 38 % DM is generated, and at an initial feed consistency of 25 % DM a solid dewatered extraction residue (press cake) of ≥ 40 % DM is generated. The plant for solid-liquid separation / extractor is optimised accordingly with regard to the achievable dewatering performance;
3) Design: the plant for solid-liquid separation/extractor is robustly built to permanently withstand the mechanical loads arising in the process. The design enables a largely trouble-free operation of the solid-liquid separation. Due to its design, the unit is suitable to resist foreign matter/impurities in the feed such as small stones without damage. Due to its design, the plant is suitable for a later change of location;
4) Process control: the plant for solid-liquid separation/extractor can be controlled with regard to essential pressing parameters (speed, pressure, and throughput) and has a PLC system including emergency shutdown. The process control system enables automated operation of the plant to the greatest possible extent without operating personnel;
5) Optimised operation and maintenance: the operation of the plant for solid-liquid separation/extractor is optimised with regard to the required electrical connected loads and the operating current required for its operation. The required measures for recurring maintenance and servicing are as low as possible.
Show more Award criteria
Price is not the only award criterion and all criteria are stated only in the procurement documents
Duration of the contract, framework agreement or dynamic purchasing system
The time frame below is expressed in number of months.
Description
Duration: 999
Information about the limits on the number of candidates to be invited
Envisaged number of candidates: 10
Scope of the procurement
Information about European Union funds:
“LIFE18/CCM/IE/001195 LIFE Farm4More – future agricultural management for multiple outputs on climate and rural development.” Description
Additional information:
“The contracting authority (BRID) is not a contracting authority within the meaning of the European Public Procurement Directives. The procurement is not...”
Additional information
The contracting authority (BRID) is not a contracting authority within the meaning of the European Public Procurement Directives. The procurement is not subject to the European Public Procurement Directives (2014/24/EU or 2014/25/EU). To ensure a transparent and fair award process, a procedure similar to the negotiated procedure with prior publication will be conducted.
2️⃣ Scope of the procurement
Title:
“Lot 2: Two Pieces of Extractors (Screw Extractors, Screw Presses), each of them Suitable for a Raw Material Throughput of 2 000-2 500 kg/h” Title
Lot Identification Number: 2
Description
Description of the procurement:
“Tenders are invited for the procurement of equipment for solid-liquid separation (e.g. screw extractors, screw presses, etc.) of various line sizes. The...”
Description of the procurement
Tenders are invited for the procurement of equipment for solid-liquid separation (e.g. screw extractors, screw presses, etc.) of various line sizes. The client would like to realise a solid-liquid separation of fermented biomass raw materials. The raw material fraction consists of grass-like biomasses, especially mixtures of grass/clover/alfalfa biomass, which is shredded to a cutting length of 3-10 cm and then subjected to a fixed-bed fermentation (ensiling). This results in a partial enzymatic and bacterial conversion of the biomass. The organic acids produced in the feedstock fermentation lower the pH value into the acidic range (pH 3.2 to 5.5) and cause partial cell disintegration. The solid-liquid separation technology envisaged must be particularly suitable for dewatering of the described raw material to obtain extracts from it.
The plant for solid-liquid separation/extractor delivers a dewatered solid extraction residue (press cake) of ≥ 38 % DM from the previously described feed material with an initial consistency of DM 20 %; or delivers a dewatered solid extraction residue (press cake) of ≥ 40 % DM from the feed material with an initial consistency of DM 25 %. The plant for solid-liquid separation / extractor is controllable with regard to essential pressing parameters (speed, contact pressure, throughput) and has a PLC -system including emergency shutdown, which enables automated operation.
With regard to the required raw material throughputs, different LOTs were defined, which are to be considered as variants of the implementation.
Lot 2: two pieces of extractors (screw extractors, screw presses), each of them suitable for a raw material throughput of 2 000-2 500 kg/h.
The solid-liquid separation system / extractor meets the following requirements:
1) Suitability for feedstock: feedstock is fermented (ensiled) grass/clover/alfalfa biomass shredded to a chop length of 3-10 cm, slightly acidic (pH - value in the range 3.2 to 5.5) with an initial consistency of 20 % dry matter (and above);
2) Dewatering targets: at an initial feed consistency of 20 % DM, a solid dewatered extraction residue (press cake) of ≥ 38 % DM is generated, and at an initial feed consistency of 25 % DM a solid dewatered extraction residue (press cake) of ≥ 40 % DM is generated. The plant for solid-liquid separation / extractor is optimised accordingly with regard to the achievable dewatering performance;
3) Design: the plant for solid-liquid separation/extractor is robustly built to permanently withstand the mechanical loads arising in the process. The design enables a largely trouble-free operation of the solid-liquid separation. Due to its design, the unit is suitable to resist foreign matter/impurities in the feed such as small stones without damage. Due to its design, the plant is suitable for a later change of location;
4) Process control: the plant for solid-liquid separation/extractor can be controlled with regard to essential pressing parameters (speed, pressure, and throughput) and has a PLC system including emergency shutdown. The process control system enables automated operation of the plant to the greatest possible extent without operating personnel;
5) Optimised operation and maintenance: the operation of the plant for solid-liquid separation/extractor is optimised with regard to the required electrical connected loads and the operating current required for its operation. The required measures for recurring maintenance and servicing are as low as possible.
3️⃣ Scope of the procurement
Title:
“Lot 3: One-piece Extractor (Screw Extractor, Screw Press) Suitable for a Raw Material Throughput of 2 000-2 500 kg/h” Title
Lot Identification Number: 3
Description
Description of the procurement:
“Tenders are invited for the procurement of equipment for solid-liquid separation (e.g. screw extractors, screw presses, etc.) of various line sizes. The...”
Description of the procurement
Tenders are invited for the procurement of equipment for solid-liquid separation (e.g. screw extractors, screw presses, etc.) of various line sizes. The client would like to realise a solid-liquid separation of fermented biomass raw materials. The raw material fraction consists of grass-like biomasses, especially mixtures of grass/clover/alfalfa biomass, which is shredded to a cutting length of 3-10 cm and then subjected to a fixed-bed fermentation (ensiling). This results in a partial enzymatic and bacterial conversion of the biomass. The organic acids produced in the feedstock fermentation lower the pH value into the acidic range (pH 3.2 to 5.5) and cause partial cell disintegration. The solid-liquid separation technology envisaged must be particularly suitable for dewatering of the described raw material to obtain extracts from it.
The plant for solid-liquid separation / extractor delivers a dewatered solid extraction residue (press cake) of ≥ 38 % DM from the previously described feed material with an initial consistency of DM 20 %; or delivers a dewatered solid extraction residue (press cake) of ≥ 40 % DM from the feed material with an initial consistency of DM 25 %. The plant for solid-liquid separation / extractor is controllable with regard to essential pressing parameters (speed, contact pressure, throughput) and has a PLC -system including emergency shutdown, which enables automated operation.
With regard to the required raw material throughputs, different LOTs were defined, which are to be considered as variants of the implementation.
Lot 3: One-piece extractor (screw extractor, screw press) suitable for a raw material throughput of 2 000-2 500 kg/h.
The solid-liquid separation system/extractor meets the following requirements:
1) Suitability for feedstock: feedstock is fermented (ensiled) grass/clover/alfalfa biomass shredded to a chop length of 3-10 cm, slightly acidic (pH - value in the range 3.2 to 5.5) with an initial consistency of 20 % dry matter (and above);
2) Dewatering targets: At an initial feed consistency of 20 % DM, a solid dewatered extraction residue (press cake) of ≥ 38 % DM is generated, and at an initial feed consistency of 25 % DM a solid dewatered extraction residue (press cake) of ≥ 40 % DM is generated. The plant for solid-liquid separation / extractor is optimised accordingly with regard to the achievable dewatering performance;
3) Design: the plant for solid-liquid separation/extractor is robustly built to permanently withstand the mechanical loads arising in the process. The design enables a largely trouble-free operation of the solid-liquid separation. Due to its design, the unit is suitable to resist foreign matter/impurities in the feed such as small stones without damage. Due to its design, the plant is suitable for a later change of location;
4) Process control: the plant for solid-liquid separation/extractor can be controlled with regard to essential pressing parameters (speed, pressure, and throughput) and has a PLC system including emergency shutdown. The process control system enables automated operation of the plant to the greatest possible extent without operating personnel;
5) Optimised operation and maintenance: the operation of the plant for solid-liquid separation/extractor is optimised with regard to the required electrical connected loads and the operating current required for its operation. The required measures for recurring maintenance and servicing are as low as possible.
Legal, economic, financial and technical information Conditions for participation
List and brief description of conditions: Selection criteria as stated in the procurement documents.
Economic and financial standing
Selection criteria as stated in the procurement documents
Technical and professional ability
Selection criteria as stated in the procurement documents
Conditions related to the contract
Contract performance conditions: As stated in the procurement documents.
Procedure Type of procedure
Competitive procedure with negotiation
Information about reduction of the number of solutions or tenders during negotiation or dialogue
Recourse to staged procedure to gradually reduce the number of solutions to be discussed or tenders to be negotiated
Information about negotiation
The contracting authority reserves the right to award the contract on the basis of the initial tenders without conducting negotiations
Administrative information
Time limit for receipt of tenders or requests to participate: 2021-04-23
11:00 📅
Languages in which tenders or requests to participate may be submitted: German 🗣️
Languages in which tenders or requests to participate may be submitted: English 🗣️
Complementary information Additional information
“The contracting authority is not a public contracting authority. The procurement in question is not subject to the public procurement directives. In order...”
The contracting authority is not a public contracting authority. The procurement in question is not subject to the public procurement directives. In order to ensure a transparent and fair award process, a procedure similar to the negotiated procedure with prior publication will be used. It is intended that BRID will establish an Austrian company for the further handling of the funding project. In this case, the company to be founded would enter into all rights and obligations of BRID by way of universal succession. The contract notice is available in English and German.
Show more Review body
Name: Handelsgericht Wien
Postal address: Marxergasse 1a
Postal town: Vienna
Postal code: 1030
Country: Austria 🇦🇹
URL: www.justiz.gv.at/hgw🌏
Source: OJS 2021/S 063-159469 (2021-03-26)
Additional information (2021-04-22) Object Scope of the procurement
Short description:
“Supply of Solid-liquid extractor (e.g. screw extractor, screw press) for solid-liquid separation of fermented biomass to obtain an aqueous extract.
Lot 1: 1...”
Short description
Supply of Solid-liquid extractor (e.g. screw extractor, screw press) for solid-liquid separation of fermented biomass to obtain an aqueous extract.
Lot 1: 1 pcs. extractor for 4 000-4 600 kg/h.
Lot 2: 2 pcs. extractors each for 2 000-2 500 kg/h.
Lot3: 1 pcs. extractor for 2 000-2 500kg/h. In order to enable the best possible (qualitative and economic) implementation, potential technology providers are invited to participate in this bidding procedure. The bidding procedure is carried out in two stages.
Complementary information Original notice reference
Notice number in the OJ S: 2021/S 063-159469
Changes Text to be corrected in the original notice
Section number: IV.2.2)
Place of text to be modified: Time limit for receipt of tenders or requests to participate
Old value
Date: 2021-04-23 📅
Time: 11:00
New value
Date: 2021-05-07 📅
Time: 11:00
Source: OJS 2021/S 081-208526 (2021-04-22)